Lund 1975 Pro-V SE 2010 boat specs
Lund
Lund 1975 Pro-V SE 2010
2010
View full specs →
VS
Lund 2010 Pro Guide 2013 boat specs
Lund
Lund 2010 Pro Guide 2013
2013
View full specs →

Lund 1975 Pro-V SE 2010 vs Lund 2010 Pro Guide 2013 — Same Brand, Different Boat

Matching a modified vee Lund 1975 Pro-V SE 2010 against a deep vee Lund 2010 Pro Guide 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Lund 1975 Pro-V SE 2010 at 19,7 ft versus Lund 2010 Pro Guide 2013 at 20,2 ft. At 173 lbs and 144 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 225 hp, the Lund 1975 Pro-V SE 2010 has a 25-hp advantage over the Lund 2010 Pro Guide 2013's 200-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Lund 1975 Pro-V SE 2010 carries 51 gallons versus 4 gallons in the Lund 2010 Pro Guide 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Lund 2010 Pro Guide 2013 is rated for 6 passengers, while the Lund 1975 Pro-V SE 2010 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Lund 2010 Pro Guide 2013 could be the deciding factor.

Bottom line: Choose the Lund 2010 Pro Guide 2013 if your priority is putting more people on the water — it handles 6 passengers and at 20,2 ft it has the deck room to back that rating up comfortably. The Lund 1975 Pro-V SE 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeLund
MakeLund
Model1975 Pro-V SE
Model2010 Pro Guide
Model Year201
Model Year2013
Measurements / Dimensions
Beam97 in
Beam90 in
Beam - Meters2.46
Beam - Meters2.29
Beam - Inches97
Beam - Inches9
Weight - Detail1,730 lbs
Weight - Detail1,440 lbs
Weight - kg784.71
Weight - kg653.17
Weight - lbs.173
Weight - lbs.144
Width [transom] - Detail87.5 in
Width [transom] - Detailnot available
Height [transom]25 in
Height [transom]25 in
Length - Feet19.67
Length - Feet20.17
Length overall - Detail19 ft. 8 in
Length overall - Detail20 ft. 2 in
Length overall - Meters5.99
Length overall - Meters6.15
Length overall - Inches236
Length overall - Inches242
Depth - Detailnot available
Depth - Detail39.5 in. bow
Depth - Centimetersnot available
Depth - Centimeters101.6
Depth - Inchesnot available
Depth - Inches39.5
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail51 gal
Fuel tank capacity - Detail40 gal
Fuel tank capacity - Liters193.06
Fuel tank capacity - Liters151.42
Fuel tank capacity - Gal51
Fuel tank capacity - Gal4
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max225 hp
Engine max200 hp
Operational Info
StorageRod Storage: 6 ft. 6 in. - 8 ft
StorageRod Storage: 6 ft. 6 in. - 7 ft
Maximum capacitynot available
Maximum capacity2,000 lbs
Maximum peoplenot available
Maximum people6
Trailer Info
Trailer - Heightnot available
Trailer - Height5 ft. 11.5 in
Trailer - Length over allnot available
Trailer - Length over all23 ft. 9.5 in
Trailer - Weightnot available
Trailer - Weight2,829 lbs
Trailer - Widthnot available
Trailer - Width8 ft. 4 in

Lund 1975 Pro-V SE 2010 vs Lund 2010 Pro Guide 2013 — Common Questions

Which is the larger boat — the Lund 1975 Pro-V SE 2010 or the Lund 2010 Pro Guide 2013?
The Lund 2010 Pro Guide 2013 is the longer of the two at 20,2 feet overall. The Lund 1975 Pro-V SE 2010 comes in at 19,7 feet, making it roughly 0,5 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Lund 1975 Pro-V SE 2010 or the Lund 2010 Pro Guide 2013?
For trailering, the Lund 2010 Pro Guide 2013 has the edge at 144 lbs dry weight versus 173 lbs for the Lund 1975 Pro-V SE 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Lund 1975 Pro-V SE 2010 is rated to a maximum of 225 hp, giving it the larger power ceiling. The Lund 2010 Pro Guide 2013 tops out at 200 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Lund 1975 Pro-V SE 2010 is Coast Guard rated for 5 passengers, while the Lund 2010 Pro Guide 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Lund 1975 Pro-V SE 2010 measures 97" wide, compared to 9" for the Lund 2010 Pro Guide 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Lund 1975 Pro-V SE 2010 or the Lund 2010 Pro Guide 2013?
The Lund 1975 Pro-V SE 2010 has the bigger tank at 51 gallons, versus 4 gallons on the Lund 2010 Pro Guide 2013. That 47-gallon difference translates to roughly 141–235 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Lund 1975 Pro-V SE 2010 and Lund 2010 Pro Guide 2013 from the same manufacturer?
Yes — both the Lund 1975 Pro-V SE 2010 and the Lund 2010 Pro Guide 2013 are built by Lund. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.