When two boats share the same hull type — in this case both the Lund 170SEE 2005 and the Lund 1852MT 2009 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Lund 170SEE 2005 at 17,0 ft versus Lund 1852MT 2009 at 18,0 ft. Weight tells a clearer story for trailering families: the Lund 1852MT 2009 tips the scales at 475 lbs — 410 lbs less than the Lund 170SEE 2005 at 65 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 50 hp for the Lund 170SEE 2005 and 45 hp for the Lund 1852MT 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Lund 1852MT 2009 is rated for 6 passengers, while the Lund 170SEE 2005 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Lund 1852MT 2009 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Lund 170SEE 2005 comes in at 1 lbs per hp versus 11 lbs per hp for the Lund 1852MT 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.