Lund 1675 Explorer SS 2011 boat specs
Lund
Lund 1675 Explorer SS 2011
2011
View full specs →
VS
Lund Classic 1625 Tiller 2006 boat specs
Lund
Lund Classic 1625 Tiller 2006
2006
View full specs →

Lund 1675 Explorer SS 2011 vs Lund Classic 1625 Tiller 2006 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Lund 1675 Explorer SS 2011 and the Lund Classic 1625 Tiller 2006 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Lund 1675 Explorer SS 2011 at 16,7 ft versus Lund Classic 1625 Tiller 2006 at 16,0 ft. At 114 lbs and 63 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 90 hp, the Lund 1675 Explorer SS 2011 has a 50-hp advantage over the Lund Classic 1625 Tiller 2006's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Lund 1675 Explorer SS 2011 comes in at 1 lbs per hp versus 2 lbs per hp for the Lund Classic 1625 Tiller 2006. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Lund 1675 Explorer SS 2011 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Lund Classic 1625 Tiller 2006 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeLund
MakeLund
Model1675 Explorer SS
ModelClassic 1625 Tiller
Model Year2011
Model Year2006
Measurements / Dimensions
Beam90 in
Beam76 in. Stern: 76 in
Beam - Meters2.29
Beam - Meters1.93
Beam - Inches9
Beam - Inches76
Weight - Detail1,140 lbs
Weight - Detail630 lbs
Weight - kg517.09
Weight - kg285.76
Weight - lbs.114
Weight - lbs.63
Height [transom]20 in
Height [transom]20 in
Length - Feet16.67
Length - Feet16
Length overall - Detail16 ft. 8 in
Length overall - Detail16 ft. 0 in
Length overall - Meters5.08
Length overall - Meters4.88
Length overall - Inches2
Length overall - Inches192
Depth - Detailnot available
Depth - DetailAmidship: 33 in. Bow: 34.5 in
Depth - Centimetersnot available
Depth - Centimeters88.9
Depth - Inchesnot available
Depth - Inches34.5
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeModified Vee
Hull typeModified Vee
Hull thicknessnot available
Hull thicknessFreeboard: .063 in. Bottom: .063 in
Engine and Drivetrain
Fuel tank capacity - Detail19 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typeOutboard
Engine max90 hp
Engine max40 hp
Operational Info
StorageRod Storage: 6 ft. 6 in. - 7 ft
Storagenot available
Maximum capacitynot available
Maximum capacity1,250 lbs
Maximum peoplenot available
Maximum people5
Trailer Info
Trailer - DetailShoreland?r
Trailer - Detailnot available

Lund 1675 Explorer SS 2011 vs Lund Classic 1625 Tiller 2006 — Common Questions

Which is the larger boat — the Lund 1675 Explorer SS 2011 or the Lund Classic 1625 Tiller 2006?
The Lund 1675 Explorer SS 2011 is the longer of the two at 16,7 feet overall. The Lund Classic 1625 Tiller 2006 comes in at 16,0 feet, making it roughly 0,7 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Lund 1675 Explorer SS 2011 or the Lund Classic 1625 Tiller 2006?
For trailering, the Lund Classic 1625 Tiller 2006 has the edge at 63 lbs dry weight versus 114 lbs for the Lund 1675 Explorer SS 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Lund 1675 Explorer SS 2011 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Lund Classic 1625 Tiller 2006 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Lund 1675 Explorer SS 2011 is Coast Guard rated for 5 passengers, while the Lund Classic 1625 Tiller 2006 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Lund 1675 Explorer SS 2011 has a better power-to-weight ratio at 1 lbs per hp compared to 2 lbs per hp for the Lund Classic 1625 Tiller 2006. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Lund Classic 1625 Tiller 2006 measures 76" wide, compared to 9" for the Lund 1675 Explorer SS 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Lund 1675 Explorer SS 2011 and Lund Classic 1625 Tiller 2006 from the same manufacturer?
Yes — both the Lund 1675 Explorer SS 2011 and the Lund Classic 1625 Tiller 2006 are built by Lund. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.