The Lund 1648M 2010 vs Lund WC 16 Tiller 2020 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Lund 1648M 2010 at 15,8 ft versus Lund WC 16 Tiller 2020 at 16,2 ft. Weight tells a clearer story for trailering families: the Lund WC 16 Tiller 2020 tips the scales at 335 lbs — 293 lbs less than the Lund 1648M 2010 at 42 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling — 35 hp for the Lund 1648M 2010 and 25 hp for the Lund WC 16 Tiller 2020. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Lund 1648M 2010 comes in at 1 lbs per hp versus 13 lbs per hp for the Lund WC 16 Tiller 2020. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
The Lund WC 16 Tiller 2020 is trailerable — a genuine lifestyle advantage at this size. The Lund 1648M 2010 isn't listed as trailerable, which may mean a permanent berth or mooring is required.
Bottom line: The Lund 1648M 2010 and Lund WC 16 Tiller 2020 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.