The Lund 1032 Jon 2012 is a flat-bottom design and the Lund A 12 2010 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Lund 1032 Jon 2012 at 10,0 ft versus Lund A 12 2010 at 12,1 ft. At 80 lbs and 164 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 3 hp for the Lund 1032 Jon 2012 and 10 hp for the Lund A 12 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Lund A 12 2010 comes in at 16 lbs per hp versus 27 lbs per hp for the Lund 1032 Jon 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.