Larson 310 Cabrio 2010 boat specs
Larson
Larson 310 Cabrio 2010
2010
View full specs →
VS
Larson LXi 292 I/O 2013 boat specs
Larson
Larson LXi 292 I/O 2013
2013
View full specs →

Larson 310 Cabrio 2010 vs Larson LXi 292 I/O 2013 — Same Brand, Different Boat

Matching a modified vee Larson 310 Cabrio 2010 against a deep vee Larson LXi 292 I/O 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Larson 310 Cabrio 2010 at 31,0 ft versus Larson LXi 292 I/O 2013 at 29,2 ft. Weight tells a clearer story for trailering families: the Larson LXi 292 I/O 2013 tips the scales at 597 lbs — 493 lbs less than the Larson 310 Cabrio 2010 at 104 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Larson 310 Cabrio 2010 carries a rated maximum of 320 hp. Engine data for the Larson LXi 292 I/O 2013 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Larson 310 Cabrio 2010 carries 16 gallons versus 1 gallons in the Larson LXi 292 I/O 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Bottom line: The Larson 310 Cabrio 2010 and Larson LXi 292 I/O 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeLarson
MakeLarson
Model310 Cabrio
ModelLXi 292 I/O
Model Year201
Model Year2013
Measurements / Dimensions
Beam10 ft. 6 in. (3.2 m)
Beam9 ft. (3 m)
Beam - Meters3.2
Beam - Meters2.74
Beam - Inches126
Beam - Inches108
Bridge clearance - DetailWith Arch: 9 ft. 4 in. (2.84 m)
Bridge clearance - Detailnot available
Bridge clearance - Meters2.84
Bridge clearance - Metersnot available
Bridge clearance - Inches112
Bridge clearance - Inchesnot available
Deadrise20℃
Deadrise24°
Draft [max] - Detail34 in. (86.4 cm)
Draft [max] - Detail39 in. (99.1 cm)
Draft [max] - Meters0.86
Draft [max] - Meters0.99
Draft [max] - Inches34
Draft [max] - Inches39
Weight - Detail10,400 lbs. (4,717 kg)
Weight - Detail5,970 lbs. (2,687 kg) with base engine (350 Mag)
Weight - kg4717.36
Weight - kg2707.94
Weight - lbs.104
Weight - lbs.597
Length - Feet31
Length - Feet29.17
Length [over all with swim platform]With Pulpit: 31 ft. 0 in. (9.44 m)
Length [over all with swim platform]not available
Length overall - Detailnot available
Length overall - Detail29 ft. 2 in. (8.69 m)
Length overall - Metersnot available
Length overall - Meters8.89
Length overall - Inchesnot available
Length overall - Inches35
Body / Hull
Hull materialFiberglass
Hull materialComposite
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail160 gal. (606 l)
Fuel tank capacity - Detail100 gal. (379 l)
Fuel tank capacity - Liters605.67
Fuel tank capacity - Liters378.54
Fuel tank capacity - Gal16
Fuel tank capacity - Gal1
Fuel typeGas or Diesel
Fuel typeGas
Drive typeI/O - Twin
Drive typeI/O
Engine max320 hp
Engine maxnot available
Operational Info
Headroom6 ft. 3 in. (1.91 m)
Headroomnot available
Water capacity46 gal. (174 l) Waste: 37 gal. (140 l)
Water capacity20 gal. (75.7 l)
Holding tank capacity - Detailnot available
Holding tank capacity - Detail13 gal. (47 l)
Holding tank capacity - Litersnot available
Holding tank capacity - Liters49.21
Holding tank capacity - Galnot available
Holding tank capacity - Gal13
Trailer Info
Trailer - Length over allnot available
Trailer - Length over all34 ft. 9 in. (10.59 m)

Larson 310 Cabrio 2010 vs Larson LXi 292 I/O 2013 — Common Questions

Which is the larger boat — the Larson 310 Cabrio 2010 or the Larson LXi 292 I/O 2013?
The Larson 310 Cabrio 2010 is the longer of the two at 31,0 feet overall. The Larson LXi 292 I/O 2013 comes in at 29,2 feet, making it roughly 1,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Larson 310 Cabrio 2010 or the Larson LXi 292 I/O 2013?
For trailering, the Larson 310 Cabrio 2010 has the edge at 104 lbs dry weight versus 597 lbs for the Larson LXi 292 I/O 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Larson 310 Cabrio 2010 has a documented max rating of 320 hp. Engine specifications for the Larson LXi 292 I/O 2013 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many passengers can the Larson LXi 292 I/O 2013 carry?
The Larson LXi 292 I/O 2013 has an official capacity rating of 8 people. Capacity data wasn't available for the other model in this comparison — verify directly with the dealer.
Which boat is wider, and does it affect trailering?
The Larson 310 Cabrio 2010 measures 126" wide, compared to 108" for the Larson LXi 292 I/O 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Larson 310 Cabrio 2010 or the Larson LXi 292 I/O 2013?
The Larson 310 Cabrio 2010 has the bigger tank at 16 gallons, versus 1 gallons on the Larson LXi 292 I/O 2013. That 15-gallon difference translates to roughly 45–75 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Larson 310 Cabrio 2010 and Larson LXi 292 I/O 2013 from the same manufacturer?
Yes — both the Larson 310 Cabrio 2010 and the Larson LXi 292 I/O 2013 are built by Larson. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.