When two boats share the same hull type — in this case both the Klamath 15 Jac Wide 2010 and the Klamath 16 EXW 2010 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Klamath 15 Jac Wide 2010 at 15,0 ft versus Klamath 16 EXW 2010 at 16,1 ft. Weight tells a clearer story for trailering families: the Klamath 16 EXW 2010 tips the scales at 535 lbs — 240 lbs less than the Klamath 15 Jac Wide 2010 at 295 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 65 hp, the Klamath 16 EXW 2010 has a 40-hp advantage over the Klamath 15 Jac Wide 2010's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Klamath 16 EXW 2010 is rated for 7 passengers, while the Klamath 15 Jac Wide 2010 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Klamath 16 EXW 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Klamath 16 EXW 2010 comes in at 8 lbs per hp versus 12 lbs per hp for the Klamath 15 Jac Wide 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.