Klamath 10 Jac 2013 boat specs
Klamath
Klamath 10 Jac 2013
2013
View full specs →
VS
Klamath 12 ft. Jac Wide 2005 boat specs
Klamath
Klamath 12 ft. Jac Wide 2005
2005
View full specs →

Klamath 10 Jac 2013 vs Klamath 12 ft. Jac Wide 2005: Same Brand, Different Boat

The Klamath 10 Jac 2013 is a modified-V design and the Klamath 12 ft. Jac Wide 2005 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Klamath 10 Jac 2013 at 10,5 ft versus Klamath 12 ft. Jac Wide 2005 at 12,0 ft. At 130 lbs and 225 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 5 hp for the Klamath 10 Jac 2013 and 20 hp for the Klamath 12 ft. Jac Wide 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Klamath 12 ft. Jac Wide 2005 is rated for 4 passengers, while the Klamath 10 Jac 2013 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Klamath 12 ft. Jac Wide 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Klamath 12 ft. Jac Wide 2005 comes in at 11 lbs per hp versus 26 lbs per hp for the Klamath 10 Jac 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Klamath 12 ft. Jac Wide 2005 if your priority is putting more people on the water - it handles 4 passengers and at 12,0 ft it has the deck room to back that rating up comfortably. The Klamath 10 Jac 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeKlamath
MakeKlamath
Model10 Jac
Model12 ft. Jac Wide
Model Year2013
Model Year2005
Measurements / Dimensions
Beam53 in.
Beam70 in.
Beam - Meters1.35
Beam - Meters1.78
Beam - Inches53
Beam - Inches70
Depth - DetailBow: 18.5 in. Midship: 14.5 in. Transom: 17.5 in.
Depth - DetailAt Bow: 20 in. At Midship: 19 in. At Transom: 21 in.
Depth - Centimeters48.26
Depth - Centimeters53.34
Depth - Inches18.5
Depth - Inches21
Weight - Detail130 lbs.
Weight - Detail225 lbs.
Weight - kg58.97
Weight - kg102.06
Weight - lbs.130
Weight - lbs.225
Height [transom]15 in.
Height [transom]15 in.; 20 in. Optional
Length - Feet10.5
Length - Feet12
Length overall - Detail10 ft. 6 in.
Length overall - Detail12 ft. 6 in.
Length overall - Meters3.2
Length overall - Meters3.81
Length overall - Inches126
Length overall - Inches150
Width [transom] - Detailnot available
Width [transom] - Detail54 in.
Length - Inchesnot available
Length - Inches6
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thicknessBottom: 0.063 in.
Hull thickness.063 in.
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max5 hp
Engine max20 hp
Operational Info
Maximum capacity420 lbs.
Maximum capacity800 lbs.
Maximum people3
Maximum people4

Klamath 10 Jac 2013 vs Klamath 12 ft. Jac Wide 2005 - Common Questions

Which is the larger boat - the Klamath 10 Jac 2013 or the Klamath 12 ft. Jac Wide 2005?
The Klamath 12 ft. Jac Wide 2005 is the longer of the two at 12,0 feet overall. The Klamath 10 Jac 2013 comes in at 10,5 feet, making it roughly 1,5 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Klamath 10 Jac 2013 or the Klamath 12 ft. Jac Wide 2005?
For trailering, the Klamath 10 Jac 2013 has the edge at 130 lbs dry weight versus 225 lbs for the Klamath 12 ft. Jac Wide 2005. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Klamath 12 ft. Jac Wide 2005 is rated to a maximum of 20 hp, giving it the larger power ceiling. The Klamath 10 Jac 2013 tops out at 5 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Klamath 10 Jac 2013 is Coast Guard rated for 3 passengers, while the Klamath 12 ft. Jac Wide 2005 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Klamath 12 ft. Jac Wide 2005 has a better power-to-weight ratio at 11 lbs per hp compared to 26 lbs per hp for the Klamath 10 Jac 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Klamath 12 ft. Jac Wide 2005 measures 70" wide, compared to 53" for the Klamath 10 Jac 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Klamath 10 Jac 2013 and Klamath 12 ft. Jac Wide 2005 from the same manufacturer?
Yes - both the Klamath 10 Jac 2013 and the Klamath 12 ft. Jac Wide 2005 are built by Klamath. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.