When two boats share the same hull type — in this case both the Harris Flotebote Cruiser 220 2013 and the Harris Flotebote Sunliner 220 2010 are pontoon designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Harris Flotebote Cruiser 220 2013 at 23,0 ft versus Harris Flotebote Sunliner 220 2010 at 22,0 ft. Weight tells a clearer story for trailering families: the Harris Flotebote Cruiser 220 2013 tips the scales at 2 577 lbs — 2 551 lbs more than the Harris Flotebote Sunliner 220 2010 at 26 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Harris Flotebote Cruiser 220 2013 carries a rated maximum of 2 hp. Engine data for the Harris Flotebote Sunliner 220 2010 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Harris Flotebote Cruiser 220 2013 carries 32 gallons versus 5 gallons in the Harris Flotebote Sunliner 220 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Harris Flotebote Sunliner 220 2010 is rated for 15 passengers, while the Harris Flotebote Cruiser 220 2013 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Harris Flotebote Sunliner 220 2010 could be the deciding factor.