Harris Flotebote Crowne 250 I/O 2006 boat specs
Harris Flotebote
Harris Flotebote Crowne 250 I/O 2006
2006
View full specs →
VS
Harris Flotebote Royal Heritage 250 2008 boat specs
Harris Flotebote
Harris Flotebote Royal Heritage 250 2008
2008
View full specs →

Harris Flotebote Crowne 250 I/O 2006 vs Harris Flotebote Royal Heritage 250 2008 — Same Brand, Different Boat

The Harris Flotebote Crowne 250 I/O 2006 vs Harris Flotebote Royal Heritage 250 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Harris Flotebote Crowne 250 I/O 2006 at 25,0 ft versus Harris Flotebote Royal Heritage 250 2008 at 26,0 ft. Weight tells a clearer story for trailering families: the Harris Flotebote Royal Heritage 250 2008 tips the scales at 2 924 lbs — 2 565 lbs less than the Harris Flotebote Crowne 250 I/O 2006 at 359 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 225 hp, the Harris Flotebote Crowne 250 I/O 2006 has a 50-hp advantage over the Harris Flotebote Royal Heritage 250 2008's 175-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 16 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Harris Flotebote Crowne 250 I/O 2006 and its 225-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Harris Flotebote Royal Heritage 250 2008 with its 175-hp rating is the more economical daily driver.
General Boat Info
MakeHarris Flotebote
MakeHarris Flotebote
ModelCrowne 250 I/O
ModelRoyal Heritage 25
Model Year2006
Model Year2008
Measurements / Dimensions
Beam8 ft. 6 in
Beam8 ft. 6 in
Beam - Meters2.59
Beam - Meters2.59
Beam - Inches102
Beam - Inches102
Bridge clearance - Detail68 in. (Bimini/stern light down) 112 in. (Walk-on top w/ stern light down)
Bridge clearance - Detail62 in. (bimini/stern light down)
Bridge clearance - Meters2.84
Bridge clearance - Meters1.57
Bridge clearance - Inches112
Bridge clearance - Inches62
Draft [drive up] - Detail14 in
Draft [drive up] - Detail13 in
Draft [drive up] meters0.36
Draft [drive up] meters0.33
Draft [drive up] inches14
Draft [drive up] inches13
Draft [max] - Detail23 in
Draft [max] - Detail22 in
Draft [max] - Meters0.58
Draft [max] - Meters0.56
Draft [max] - Inches23
Draft [max] - Inches22
Weight - Detail3,590 lbs
Weight - Detail2,924 lbs
Weight - kg1628.4
Weight - kg1326.3
Weight - lbs.359
Weight - lbs.2924
Length - Feet25
Length - Feet26
Length overall - Detail25 ft. 0 in
Length overall - Detail26 ft. 8 in
Length overall - Meters7.62
Length overall - Meters8.13
Length overall - Inches3
Length overall - Inches32
Length - Inchesnot available
Length - Inches8
Pontoon and Inflatable Specific
Tube diameter25 in
Tube diameter25 in
Engine and Drivetrain
Drive typeI/O
Drive typeOutboard
Engine max225 hp w/ Performance-III Package: 225 hp
Engine max175 hp
Engine/s standardnot available
Engine/s standard9.9 Mercury EL BF PK 4S
Fuel typenot available
Fuel typeGas
Operational Info
Maximum peoplew/ Performance-III Package: 16
Maximum people16 @ 2,374 lbs
Body / Hull
Hull materialnot available
Hull materialAluminum
Hull typenot available
Hull typePontoon

Harris Flotebote Crowne 250 I/O 2006 vs Harris Flotebote Royal Heritage 250 2008 — Common Questions

Which is the larger boat — the Harris Flotebote Crowne 250 I/O 2006 or the Harris Flotebote Royal Heritage 250 2008?
The Harris Flotebote Royal Heritage 250 2008 is the longer of the two at 26,0 feet overall. The Harris Flotebote Crowne 250 I/O 2006 comes in at 25,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Harris Flotebote Crowne 250 I/O 2006 or the Harris Flotebote Royal Heritage 250 2008?
For trailering, the Harris Flotebote Crowne 250 I/O 2006 has the edge at 359 lbs dry weight versus 2 924 lbs for the Harris Flotebote Royal Heritage 250 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Harris Flotebote Crowne 250 I/O 2006 is rated to a maximum of 225 hp, giving it the larger power ceiling. The Harris Flotebote Royal Heritage 250 2008 tops out at 175 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Harris Flotebote Crowne 250 I/O 2006 is Coast Guard rated for 16 passengers, while the Harris Flotebote Royal Heritage 250 2008 is certified for 16. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Harris Flotebote Crowne 250 I/O 2006 and Harris Flotebote Royal Heritage 250 2008 share an 8 ft. 6 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Harris Flotebote Crowne 250 I/O 2006 and Harris Flotebote Royal Heritage 250 2008 from the same manufacturer?
Yes — both the Harris Flotebote Crowne 250 I/O 2006 and the Harris Flotebote Royal Heritage 250 2008 are built by Harris Flotebote. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.