When two boats share the same hull type — in this case both the Harris Flotebote Crowne 230 2011 and the Harris Flotebote Grand Mariner SEL 250 2013 are pontoon designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The Harris Flotebote Grand Mariner SEL 250 2013 measures 27,3 feet overall (2013), giving it roughly 4,3 additional feet of deck space compared to the Harris Flotebote Crowne 230 2011 at 23,0 feet (2011). Weight tells a clearer story for trailering families: the Harris Flotebote Grand Mariner SEL 250 2013 tips the scales at 4 151 lbs — 1 238 lbs less than the Harris Flotebote Crowne 230 2011 at 2 913 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 430 hp, the Harris Flotebote Grand Mariner SEL 250 2013 has a 280-hp advantage over the Harris Flotebote Crowne 230 2011's 150-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Harris Flotebote Grand Mariner SEL 250 2013 carries 81 gallons versus 5 gallons in the Harris Flotebote Crowne 230 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Harris Flotebote Grand Mariner SEL 250 2013 is rated for 16 passengers, while the Harris Flotebote Crowne 230 2011 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Harris Flotebote Grand Mariner SEL 250 2013 could be the deciding factor.