G3 Boats Welded Jon - 1756 VBW 2008 boat specs
G3 Boats
G3 Boats Welded Jon - 1756 VBW 2008
2008
View full specs →
VS
G3 Boats Welded Jon - 1860 VBW 2008 boat specs
G3 Boats
G3 Boats Welded Jon - 1860 VBW 2008
2008
View full specs →

G3 Boats Welded Jon - 1756 VBW 2008 vs G3 Boats Welded Jon - 1860 VBW 2008: A Close Look at Two Modified-V Boats

Both the G3 Boats Welded Jon - 1756 VBW 2008 and the G3 Boats Welded Jon - 1860 VBW 2008 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - G3 Boats Welded Jon - 1756 VBW 2008 at 16,0 ft versus G3 Boats Welded Jon - 1860 VBW 2008 at 17,0 ft. At 425 lbs and 500 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 50 hp for the G3 Boats Welded Jon - 1756 VBW 2008 and 60 hp for the G3 Boats Welded Jon - 1860 VBW 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Welded Jon - 1860 VBW 2008 is rated for 6 passengers, while the G3 Boats Welded Jon - 1756 VBW 2008 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Welded Jon - 1860 VBW 2008 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1860 VBW 2008 comes in at 8 lbs per hp versus 9 lbs per hp for the G3 Boats Welded Jon - 1756 VBW 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the G3 Boats Welded Jon - 1860 VBW 2008 if your priority is putting more people on the water - it handles 6 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The G3 Boats Welded Jon - 1756 VBW 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelWelded Jon - 1756 VBW
ModelWelded Jon - 1860 VBW
Model Year2008
Model Year2008
Measurements / Dimensions
Beam77 in.
Beam80 in.
Beam - Meters1.96
Beam - Meters2.03
Beam - Inches77
Beam - Inches80
Deadrise3.5℃
Deadrise6℃
Depth - Detail21 in.
Depth - Detail24 in.
Depth - Centimeters53.34
Depth - Centimeters60.96
Depth - Inches21
Depth - Inches24
Weight - Detail425 lbs.
Weight - Detail500 lbs.
Weight - kg192.78
Weight - kg226.8
Weight - lbs.425
Weight - lbs.500
Width [transom] - Detail56 in.
Width [transom] - Detail60 in.
Height [transom]20 in.
Height [transom]20 in.
Length - Feet16
Length - Feet17
Length - Inches10
Length - Inches11
Length overall - Detail16 ft. 10 in.
Length overall - Detail17 ft. 11 in.
Length overall - Meters5.13
Length overall - Meters5.46
Length overall - Inches202
Length overall - Inches215
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 ga.
Hull thickness0.100 ga.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50T / 60C
Engine max60T / 90C
Operational Info
Maximum capacity1,170 lbs.
Maximum capacity1,500 lbs.
Maximum people5 / 669 lbs.
Maximum people6 / 898 lbs.

G3 Boats Welded Jon - 1756 VBW 2008 vs G3 Boats Welded Jon - 1860 VBW 2008 - Common Questions

Which is the larger boat - the G3 Boats Welded Jon - 1756 VBW 2008 or the G3 Boats Welded Jon - 1860 VBW 2008?
The G3 Boats Welded Jon - 1860 VBW 2008 is the longer of the two at 17,0 feet overall. The G3 Boats Welded Jon - 1756 VBW 2008 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Welded Jon - 1756 VBW 2008 or the G3 Boats Welded Jon - 1860 VBW 2008?
For trailering, the G3 Boats Welded Jon - 1756 VBW 2008 has the edge at 425 lbs dry weight versus 500 lbs for the G3 Boats Welded Jon - 1860 VBW 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Welded Jon - 1860 VBW 2008 is rated to a maximum of 60 hp, giving it the larger power ceiling. The G3 Boats Welded Jon - 1756 VBW 2008 tops out at 50 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Welded Jon - 1756 VBW 2008 is Coast Guard rated for 5 passengers, while the G3 Boats Welded Jon - 1860 VBW 2008 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Welded Jon - 1860 VBW 2008 has a better power-to-weight ratio at 8 lbs per hp compared to 9 lbs per hp for the G3 Boats Welded Jon - 1756 VBW 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The G3 Boats Welded Jon - 1860 VBW 2008 measures 80" wide, compared to 77" for the G3 Boats Welded Jon - 1756 VBW 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the G3 Boats Welded Jon - 1756 VBW 2008 and G3 Boats Welded Jon - 1860 VBW 2008 from the same manufacturer?
Yes - both the G3 Boats Welded Jon - 1756 VBW 2008 and the G3 Boats Welded Jon - 1860 VBW 2008 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.