G3 Boats Riveted Jon - 1236 2008 boat specs
G3 Boats
G3 Boats Riveted Jon - 1236 2008
2008
View full specs →
VS
G3 Boats Welded Jon - 1448 WL 2010 boat specs
G3 Boats
G3 Boats Welded Jon - 1448 WL 2010
2010
View full specs →

G3 Boats Riveted Jon - 1236 2008 vs G3 Boats Welded Jon - 1448 WL 2010: A Close Look at Two Flat-Bottom Boats

Both the G3 Boats Riveted Jon - 1236 2008 and the G3 Boats Welded Jon - 1448 WL 2010 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - G3 Boats Riveted Jon - 1236 2008 at 11,0 ft versus G3 Boats Welded Jon - 1448 WL 2010 at 13,8 ft. Weight tells a clearer story for trailering families: the G3 Boats Welded Jon - 1448 WL 2010 tips the scales at 360 lbs - 216 lbs less than the G3 Boats Riveted Jon - 1236 2008 at 144 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 10 hp for the G3 Boats Riveted Jon - 1236 2008 and 25 hp for the G3 Boats Welded Jon - 1448 WL 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Welded Jon - 1448 WL 2010 is rated for 4 passengers, while the G3 Boats Riveted Jon - 1236 2008 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Welded Jon - 1448 WL 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1448 WL 2010 comes in at 14 lbs per hp versus 14 lbs per hp for the G3 Boats Riveted Jon - 1236 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the G3 Boats Welded Jon - 1448 WL 2010 if your priority is putting more people on the water - it handles 4 passengers and at 13,8 ft it has the deck room to back that rating up comfortably. The G3 Boats Riveted Jon - 1236 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelRiveted Jon - 1236
ModelWelded Jon - 1448 WL
Model Year2008
Model Year2010
Measurements / Dimensions
Beam56 in.
Beam70 in.
Beam - Meters1.42
Beam - Meters1.78
Beam - Inches56
Beam - Inches70
Deadrise0℃
Deadrise0℃
Depth - Detail18 in.
Depth - Detail21 in.
Depth - Centimeters45.72
Depth - Centimeters53.34
Depth - Inches18
Depth - Inches21
Weight - Detail144 lbs.
Weight - Detail360 lbs.
Weight - kg65.32
Weight - kg163.29
Weight - lbs.144
Weight - lbs.360
Width [transom] - Detail36 in.
Width [transom] - Detail48 in.
Height [transom]16 in.
Height [transom]16 in.
Length - Feet11
Length - Feet13.83
Length - Inches11
Length - Inchesnot available
Length overall - Detail11 ft. 11 in.
Length overall - Detail13 ft. 10 in.
Length overall - Meters3.63
Length overall - Meters4.22
Length overall - Inches143
Length overall - Inches166
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.054 ga.
Hull thickness0.100 ga.
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max10 hp
Engine max25 hp
Engine/s standardnot available
Engine/s standardYamaha
Operational Info
Maximum capacity470 lbs.
Maximum capacity820 lbs.
Maximum people2 / 268 lbs.
Maximum people4

G3 Boats Riveted Jon - 1236 2008 vs G3 Boats Welded Jon - 1448 WL 2010 - Common Questions

Which is the larger boat - the G3 Boats Riveted Jon - 1236 2008 or the G3 Boats Welded Jon - 1448 WL 2010?
The G3 Boats Welded Jon - 1448 WL 2010 is the longer of the two at 13,8 feet overall. The G3 Boats Riveted Jon - 1236 2008 comes in at 11,0 feet, making it roughly 2,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Riveted Jon - 1236 2008 or the G3 Boats Welded Jon - 1448 WL 2010?
For trailering, the G3 Boats Riveted Jon - 1236 2008 has the edge at 144 lbs dry weight versus 360 lbs for the G3 Boats Welded Jon - 1448 WL 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Welded Jon - 1448 WL 2010 is rated to a maximum of 25 hp, giving it the larger power ceiling. The G3 Boats Riveted Jon - 1236 2008 tops out at 10 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Riveted Jon - 1236 2008 is Coast Guard rated for 2 passengers, while the G3 Boats Welded Jon - 1448 WL 2010 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Welded Jon - 1448 WL 2010 has a better power-to-weight ratio at 14 lbs per hp compared to 14 lbs per hp for the G3 Boats Riveted Jon - 1236 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The G3 Boats Welded Jon - 1448 WL 2010 measures 70" wide, compared to 56" for the G3 Boats Riveted Jon - 1236 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the G3 Boats Riveted Jon - 1236 2008 and G3 Boats Welded Jon - 1448 WL 2010 from the same manufacturer?
Yes - both the G3 Boats Riveted Jon - 1236 2008 and the G3 Boats Welded Jon - 1448 WL 2010 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.