G3 Boats Outfitter V170 T 2009 boat specs
G3 Boats
G3 Boats Outfitter V170 T 2009
2009
View full specs →
VS
G3 Boats Welded Jon - 1648 WL 2010 boat specs
G3 Boats
G3 Boats Welded Jon - 1648 WL 2010
2010
View full specs →

G3 Boats Outfitter V170 T 2009 vs G3 Boats Welded Jon - 1648 WL 2010: Same Brand, Different Boat

The G3 Boats Outfitter V170 T 2009 is a deep-V design and the G3 Boats Welded Jon - 1648 WL 2010 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - G3 Boats Outfitter V170 T 2009 at 16,0 ft versus G3 Boats Welded Jon - 1648 WL 2010 at 15,8 ft. Weight tells a clearer story for trailering families: the G3 Boats Outfitter V170 T 2009 tips the scales at 940 lbs - 560 lbs more than the G3 Boats Welded Jon - 1648 WL 2010 at 380 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 70 hp, the G3 Boats Outfitter V170 T 2009 has a 45-hp advantage over the G3 Boats Welded Jon - 1648 WL 2010's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Outfitter V170 T 2009 comes in at 13 lbs per hp versus 15 lbs per hp for the G3 Boats Welded Jon - 1648 WL 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the G3 Boats Outfitter V170 T 2009 and its 70-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Welded Jon - 1648 WL 2010 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelOutfitter V170 T
ModelWelded Jon - 1648 WL
Model Year2009
Model Year2010
Measurements / Dimensions
Beam84 in.
Beam70 in.
Beam - Meters2.13
Beam - Meters1.78
Beam - Inches84
Beam - Inches70
Weight - Detail940 lbs.
Weight - Detail380 lbs.
Weight - kg426.38
Weight - kg172.36
Weight - lbs.940
Weight - lbs.380
Width [transom] - Detail67 in.
Width [transom] - Detail48 in.
Height [transom]20 in.
Height [transom]16 in.
Length - Feet16
Length - Feet15.83
Length - Inches10
Length - Inchesnot available
Length overall - Detail16 ft. 10 in.
Length overall - Detail15 ft. 10 in.
Length overall - Meters5.13
Length overall - Meters4.83
Length overall - Inches202
Length overall - Inches190
Deadrisenot available
Deadrise0℃
Depth - Detailnot available
Depth - Detail21 in.
Depth - Centimetersnot available
Depth - Centimeters53.34
Depth - Inchesnot available
Depth - Inches21
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.80 ' 0.80 (Double plated bow)
Hull thickness0.100 ga.
Hull typeDeep Vee
Hull typeFlat
Engine and Drivetrain
Fuel tank capacity - Detail22 gal.
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters83.28
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal22
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max70T/90C
Engine max25 hp
Engine/s standardnot available
Engine/s standardYamaha
Operational Info
Maximum capacity1,150 lbs.
Maximum capacity920 lbs.
Maximum people4
Maximum people4
Trailer Info
Trailer - Length over all20 ft. 10 in. Deduct 20 in. with Trail Guard tongue removed
Trailer - Length over allnot available

G3 Boats Outfitter V170 T 2009 vs G3 Boats Welded Jon - 1648 WL 2010 - Common Questions

Which is the larger boat - the G3 Boats Outfitter V170 T 2009 or the G3 Boats Welded Jon - 1648 WL 2010?
The G3 Boats Outfitter V170 T 2009 is the longer of the two at 16,0 feet overall. The G3 Boats Welded Jon - 1648 WL 2010 comes in at 15,8 feet, making it roughly 0,2 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Outfitter V170 T 2009 or the G3 Boats Welded Jon - 1648 WL 2010?
For trailering, the G3 Boats Welded Jon - 1648 WL 2010 has the edge at 380 lbs dry weight versus 940 lbs for the G3 Boats Outfitter V170 T 2009. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Outfitter V170 T 2009 is rated to a maximum of 70 hp, giving it the larger power ceiling. The G3 Boats Welded Jon - 1648 WL 2010 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Outfitter V170 T 2009 is Coast Guard rated for 4 passengers, while the G3 Boats Welded Jon - 1648 WL 2010 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Outfitter V170 T 2009 has a better power-to-weight ratio at 13 lbs per hp compared to 15 lbs per hp for the G3 Boats Welded Jon - 1648 WL 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The G3 Boats Outfitter V170 T 2009 measures 84" wide, compared to 70" for the G3 Boats Welded Jon - 1648 WL 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the G3 Boats Outfitter V170 T 2009 and G3 Boats Welded Jon - 1648 WL 2010 from the same manufacturer?
Yes - both the G3 Boats Outfitter V170 T 2009 and the G3 Boats Welded Jon - 1648 WL 2010 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.