Matching a deep vee G3 Boats Outfitter V143 T 2012 against a modified vee G3 Boats Welded Jon - 1860 VBW 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats Outfitter V143 T 2012 at 14,3 ft versus G3 Boats Welded Jon - 1860 VBW 2009 at 17,0 ft. At 51 lbs and 5 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 40 hp for the G3 Boats Outfitter V143 T 2012 and 60 hp for the G3 Boats Welded Jon - 1860 VBW 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Welded Jon - 1860 VBW 2009 is rated for 6 passengers, while the G3 Boats Outfitter V143 T 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Welded Jon - 1860 VBW 2009 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1860 VBW 2009 comes in at 0 lbs per hp versus 1 lbs per hp for the G3 Boats Outfitter V143 T 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.