When two boats share the same hull type — in this case both the G3 Boats HP 170 2008 and the G3 Boats Welded Jon - 1860 VBW 2008 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — G3 Boats HP 170 2008 at 17,0 ft versus G3 Boats Welded Jon - 1860 VBW 2008 at 17,0 ft. Weight tells a clearer story for trailering families: the G3 Boats HP 170 2008 tips the scales at 118 lbs — 113 lbs more than the G3 Boats Welded Jon - 1860 VBW 2008 at 5 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats HP 170 2008 has a 55-hp advantage over the G3 Boats Welded Jon - 1860 VBW 2008's 60-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Welded Jon - 1860 VBW 2008 is rated for 6 passengers, while the G3 Boats HP 170 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Welded Jon - 1860 VBW 2008 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1860 VBW 2008 comes in at 0 lbs per hp versus 1 lbs per hp for the G3 Boats HP 170 2008. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.