G3 Boats Guide V18 2006 boat specs
G3 Boats
G3 Boats Guide V18 2006
2006
View full specs →
VS
G3 Boats Welded Jon - 1652VBW 2006 boat specs
G3 Boats
G3 Boats Welded Jon - 1652VBW 2006
2006
View full specs →

G3 Boats Guide V18 2006 vs G3 Boats Welded Jon - 1652VBW 2006: Same Brand, Different Boat

The G3 Boats Guide V18 2006 vs G3 Boats Welded Jon - 1652VBW 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - G3 Boats Guide V18 2006 at 17,0 ft versus G3 Boats Welded Jon - 1652VBW 2006 at 15,0 ft. Weight tells a clearer story for trailering families: the G3 Boats Guide V18 2006 tips the scales at 540 lbs - 208 lbs more than the G3 Boats Welded Jon - 1652VBW 2006 at 332 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 70 hp, the G3 Boats Guide V18 2006 has a 30-hp advantage over the G3 Boats Welded Jon - 1652VBW 2006's 40-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Guide V18 2006 comes in at 8 lbs per hp versus 8 lbs per hp for the G3 Boats Welded Jon - 1652VBW 2006. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the G3 Boats Guide V18 2006 and its 70-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Welded Jon - 1652VBW 2006 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelGuide V18
ModelWelded Jon - 1652VBW
Model Year2006
Model Year2006
Measurements / Dimensions
Beam84 in.
Beam71 in.
Beam - Meters2.13
Beam - Meters1.8
Beam - Inches84
Beam - Inches71
Depth - Detail30 in.
Depth - Detail21 in.
Depth - Centimeters76.2
Depth - Centimeters53.34
Depth - Inches30
Depth - Inches21
Weight - Detail540 lbs.
Weight - Detail332 lbs.
Weight - kg244.94
Weight - kg150.59
Weight - lbs.540
Weight - lbs.332
Width [transom] - Detail62 in.
Width [transom] - Detail52 in.
Height [transom]20 in.
Height [transom]20 in.
Length - Feet17
Length - Feet15
Length - Inches10
Length - Inches10
Length overall - Detail17 ft. 10 in.
Length overall - Detail15 ft. 10 in.
Length overall - Meters5.44
Length overall - Meters4.83
Length overall - Inches214
Length overall - Inches190
Deadrisenot available
Deadrise3℃
Body / Hull
Hull thickness.100 gauge
Hull thickness.100 gauge
Hull materialnot available
Hull materialAluminum
Engine and Drivetrain
Drive typeOutboard
Drive typeOutboard
Engine max70 hp
Engine max40T / 60C
Operational Info
Maximum capacitynot available
Maximum capacity1,000 lbs.
Maximum peoplenot available
Maximum people5

G3 Boats Guide V18 2006 vs G3 Boats Welded Jon - 1652VBW 2006 - Common Questions

Which is the larger boat - the G3 Boats Guide V18 2006 or the G3 Boats Welded Jon - 1652VBW 2006?
The G3 Boats Guide V18 2006 is the longer of the two at 17,0 feet overall. The G3 Boats Welded Jon - 1652VBW 2006 comes in at 15,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Guide V18 2006 or the G3 Boats Welded Jon - 1652VBW 2006?
For trailering, the G3 Boats Welded Jon - 1652VBW 2006 has the edge at 332 lbs dry weight versus 540 lbs for the G3 Boats Guide V18 2006. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Guide V18 2006 is rated to a maximum of 70 hp, giving it the larger power ceiling. The G3 Boats Welded Jon - 1652VBW 2006 tops out at 40 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Guide V18 2006 is Coast Guard rated for 5 passengers, while the G3 Boats Welded Jon - 1652VBW 2006 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Guide V18 2006 has a better power-to-weight ratio at 8 lbs per hp compared to 8 lbs per hp for the G3 Boats Welded Jon - 1652VBW 2006. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The G3 Boats Guide V18 2006 measures 84" wide, compared to 71" for the G3 Boats Welded Jon - 1652VBW 2006. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the G3 Boats Guide V18 2006 and G3 Boats Welded Jon - 1652VBW 2006 from the same manufacturer?
Yes - both the G3 Boats Guide V18 2006 and the G3 Boats Welded Jon - 1652VBW 2006 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.