The G3 Boats Guide V170 T 2009 is a deep-V design and the G3 Boats Welded Jon - 1448 WL 2009 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - G3 Boats Guide V170 T 2009 at 16,0 ft versus G3 Boats Welded Jon - 1448 WL 2009 at 13,0 ft. Weight tells a clearer story for trailering families: the G3 Boats Guide V170 T 2009 tips the scales at 940 lbs - 580 lbs more than the G3 Boats Welded Jon - 1448 WL 2009 at 360 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 70 hp, the G3 Boats Guide V170 T 2009 has a 45-hp advantage over the G3 Boats Welded Jon - 1448 WL 2009's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Guide V170 T 2009 comes in at 13 lbs per hp versus 14 lbs per hp for the G3 Boats Welded Jon - 1448 WL 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The G3 Boats Guide V170 T 2009 at 16,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The G3 Boats Welded Jon - 1448 WL 2009 at 13,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.