Matching a deep vee G3 Boats Guide V14 2010 against a modified vee G3 Boats Welded Jon - 1652 VBW 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department — G3 Boats Guide V14 2010 at 14,5 ft versus G3 Boats Welded Jon - 1652 VBW 2009 at 15,0 ft. At 2 lbs and 4 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 50 hp, the G3 Boats Welded Jon - 1652 VBW 2009 has a 30-hp advantage over the G3 Boats Guide V14 2010's 20-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1652 VBW 2009 comes in at 0 lbs per hp versus 0 lbs per hp for the G3 Boats Guide V14 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the G3 Boats Welded Jon - 1652 VBW 2009 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Guide V14 2010 with its 20-hp rating is the more economical daily driver.