G3 Boats Guide V14 CXT 2012 boat specs
G3 Boats
G3 Boats Guide V14 CXT 2012
2012
View full specs →
VS
G3 Boats Welded Jon - 1652 VBW 2008 boat specs
G3 Boats
G3 Boats Welded Jon - 1652 VBW 2008
2008
View full specs →

G3 Boats Guide V14 CXT 2012 vs G3 Boats Welded Jon - 1652 VBW 2008: Same Brand, Different Boat

The G3 Boats Guide V14 CXT 2012 is a deep-V design and the G3 Boats Welded Jon - 1652 VBW 2008 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - G3 Boats Guide V14 CXT 2012 at 14,3 ft versus G3 Boats Welded Jon - 1652 VBW 2008 at 15,0 ft. At 320 lbs and 400 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 30 hp for the G3 Boats Guide V14 CXT 2012 and 50 hp for the G3 Boats Welded Jon - 1652 VBW 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1652 VBW 2008 comes in at 8 lbs per hp versus 11 lbs per hp for the G3 Boats Guide V14 CXT 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the G3 Boats Welded Jon - 1652 VBW 2008 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Guide V14 CXT 2012 with its 30-hp rating is the more economical daily driver.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelGuide V14 CXT
ModelWelded Jon - 1652 VBW
Model Year2012
Model Year2008
Measurements / Dimensions
Beam71 in.
Beam71 in.
Beam - Meters1.8
Beam - Meters1.8
Beam - Inches71
Beam - Inches71
Deadrise3℃
Deadrise3℃
Depth - Detail31 in.
Depth - Detail21 in.
Depth - Centimeters78.74
Depth - Centimeters53.34
Depth - Inches31
Depth - Inches21
Weight - Detail320 lbs.
Weight - Detail400 lbs.
Weight - kg145.15
Weight - kg181.44
Weight - lbs.320
Weight - lbs.400
Height [transom]20 in.
Height [transom]20 in.
Length - Feet14.25
Length - Feet15
Length overall - Detail14 ft. 3 in.
Length overall - Detail15 ft. 10 in.
Length overall - Meters4.34
Length overall - Meters4.83
Length overall - Inches171
Length overall - Inches190
Width [transom] - Detailnot available
Width [transom] - Detail52 in.
Length - Inchesnot available
Length - Inches10
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.064 ga.
Hull thickness0.100 ga.
Hull typeDeep Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max30 hp
Engine max50T / 60C
Operational Info
Maximum capacity950 lbs.
Maximum capacity1,000 lbs.
Maximum people4
Maximum people4 / 499 lbs.

G3 Boats Guide V14 CXT 2012 vs G3 Boats Welded Jon - 1652 VBW 2008 - Common Questions

Which is the larger boat - the G3 Boats Guide V14 CXT 2012 or the G3 Boats Welded Jon - 1652 VBW 2008?
The G3 Boats Welded Jon - 1652 VBW 2008 is the longer of the two at 15,0 feet overall. The G3 Boats Guide V14 CXT 2012 comes in at 14,3 feet, making it roughly 0,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Guide V14 CXT 2012 or the G3 Boats Welded Jon - 1652 VBW 2008?
For trailering, the G3 Boats Guide V14 CXT 2012 has the edge at 320 lbs dry weight versus 400 lbs for the G3 Boats Welded Jon - 1652 VBW 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Welded Jon - 1652 VBW 2008 is rated to a maximum of 50 hp, giving it the larger power ceiling. The G3 Boats Guide V14 CXT 2012 tops out at 30 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Guide V14 CXT 2012 is Coast Guard rated for 4 passengers, while the G3 Boats Welded Jon - 1652 VBW 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Welded Jon - 1652 VBW 2008 has a better power-to-weight ratio at 8 lbs per hp compared to 11 lbs per hp for the G3 Boats Guide V14 CXT 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the G3 Boats Guide V14 CXT 2012 and G3 Boats Welded Jon - 1652 VBW 2008 share an 71 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the G3 Boats Guide V14 CXT 2012 and G3 Boats Welded Jon - 1652 VBW 2008 from the same manufacturer?
Yes - both the G3 Boats Guide V14 CXT 2012 and the G3 Boats Welded Jon - 1652 VBW 2008 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.