Matching a deep vee G3 Boats Angler V172 T 2010 against a tunnel G3 Boats Jet Tunnel 1656 CCJ 2011 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats Angler V172 T 2010 at 17,2 ft versus G3 Boats Jet Tunnel 1656 CCJ 2011 at 16,4 ft. At 123 lbs and 81 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 75 hp for the G3 Boats Angler V172 T 2010 and 60 hp for the G3 Boats Jet Tunnel 1656 CCJ 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the G3 Boats Angler V172 T 2010 carries 33 gallons versus 12 gallons in the G3 Boats Jet Tunnel 1656 CCJ 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V172 T 2010 is rated for 5 passengers, while the G3 Boats Jet Tunnel 1656 CCJ 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V172 T 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Jet Tunnel 1656 CCJ 2011 comes in at 1 lbs per hp versus 2 lbs per hp for the G3 Boats Angler V172 T 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.