Matching a deep vee G3 Boats Angler V172 FS 2011 against a flat G3 Boats Riveted Jon - 1236 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The G3 Boats Angler V172 FS 2011 measures 17,2 feet overall (2011), giving it roughly 6,2 additional feet of deck space compared to the G3 Boats Riveted Jon - 1236 2009 at 11,0 feet (2009). At 146 lbs and 144 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats Angler V172 FS 2011 has a 105-hp advantage over the G3 Boats Riveted Jon - 1236 2009's 10-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V172 FS 2011 is rated for 5 passengers, while the G3 Boats Riveted Jon - 1236 2009 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V172 FS 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V172 FS 2011 comes in at 1 lbs per hp versus 14 lbs per hp for the G3 Boats Riveted Jon - 1236 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.