The G3 Boats Angler V172 F 2010 vs G3 Boats Guide V16XT Riveted Loose Jon 2022 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — G3 Boats Angler V172 F 2010 at 17,2 ft versus G3 Boats Guide V16XT Riveted Loose Jon 2022 at 16,6 ft. Weight tells a clearer story for trailering families: the G3 Boats Guide V16XT Riveted Loose Jon 2022 tips the scales at 260 lbs — 116 lbs less than the G3 Boats Angler V172 F 2010 at 144 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats Angler V172 F 2010 has a 90-hp advantage over the G3 Boats Guide V16XT Riveted Loose Jon 2022's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V172 F 2010 comes in at 1 lbs per hp versus 10 lbs per hp for the G3 Boats Guide V16XT Riveted Loose Jon 2022. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

The G3 Boats Guide V16XT Riveted Loose Jon 2022 is trailerable — a genuine lifestyle advantage at this size. The G3 Boats Angler V172 F 2010 isn't listed as trailerable, which may mean a permanent berth or mooring is required. The G3 Boats Angler V172 F 2010 trailer is listed at 2,410 lbs.