When two boats share the same hull type — in this case both the G3 Boats Angler V172 C 2012 and the G3 Boats Outfitter V143 T 2012 are deep vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — G3 Boats Angler V172 C 2012 at 17,2 ft versus G3 Boats Outfitter V143 T 2012 at 14,3 ft. At 14 lbs and 51 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats Angler V172 C 2012 has a 75-hp advantage over the G3 Boats Outfitter V143 T 2012's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the G3 Boats Angler V172 C 2012 carries 33 gallons versus 7 gallons in the G3 Boats Outfitter V143 T 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V172 C 2012 is rated for 5 passengers, while the G3 Boats Outfitter V143 T 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V172 C 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V172 C 2012 comes in at 0 lbs per hp versus 1 lbs per hp for the G3 Boats Outfitter V143 T 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.