G3 Boats Angler V167 T 2010 boat specs
G3 Boats
G3 Boats Angler V167 T 2010
2010
View full specs →
VS
G3 Boats Welded Jon - 1756VBW 2007 boat specs
G3 Boats
G3 Boats Welded Jon - 1756VBW 2007
2007
View full specs →

G3 Boats Angler V167 T 2010 vs G3 Boats Welded Jon - 1756VBW 2007: Same Brand, Different Boat

The G3 Boats Angler V167 T 2010 vs G3 Boats Welded Jon - 1756VBW 2007 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - G3 Boats Angler V167 T 2010 at 16,6 ft versus G3 Boats Welded Jon - 1756VBW 2007 at 16,0 ft. Weight tells a clearer story for trailering families: the G3 Boats Angler V167 T 2010 tips the scales at 800 lbs - 375 lbs more than the G3 Boats Welded Jon - 1756VBW 2007 at 425 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 60 hp for the G3 Boats Angler V167 T 2010 and 50 hp for the G3 Boats Welded Jon - 1756VBW 2007. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1756VBW 2007 comes in at 9 lbs per hp versus 13 lbs per hp for the G3 Boats Angler V167 T 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The G3 Boats Angler V167 T 2010 and G3 Boats Welded Jon - 1756VBW 2007 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeG3 Boats
MakeG3 Boats
ModelAngler V167 T
ModelWelded Jon - 1756VBW
Model Year2010
Model Year2007
Measurements / Dimensions
Beam77 in.
Beam77 in.
Beam - Meters1.96
Beam - Meters1.96
Beam - Inches77
Beam - Inches77
Deadrise9.5℃
Deadrise3.5℃
Depth - Detail30 in.
Depth - Detail21 in.
Depth - Centimeters76.2
Depth - Centimeters53.34
Depth - Inches30
Depth - Inches21
Weight - Detail800 lbs.
Weight - Detail425 lbs.
Weight - kg362.87
Weight - kg192.78
Weight - lbs.800
Weight - lbs.425
Width [transom] - Detail60 in.
Width [transom] - Detail56 in.
Height [transom]20 in.
Height [transom]20 in.
Length - Feet16.58
Length - Feet16
Length overall - Detail16 ft. 7 in.
Length overall - Detail16 ft. 10 in.
Length overall - Meters5.05
Length overall - Meters5.13
Length overall - Inches199
Length overall - Inches202
Length - Inchesnot available
Length - Inches10
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 + 0.080 ga. (double plated bow)
Hull thickness0.100 ga.
Hull typeDeep Vee
Hull typenot available
Engine and Drivetrain
Engine/s standardYamaha
Engine/s standardnot available
Fuel tank capacity - Detail13 gal.
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters49.21
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal13
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max60 hp
Engine max50T / 60C
Operational Info
StorageLivewell: 10 x 45 in., 23 gal.
Storagenot available
Maximum capacity1,100 lbs.
Maximum capacity1,170 lbs.
Maximum people5
Maximum people5
Trailer Info
Trailer - Length over all20 ft. 6 in. Deduct 20 in. with Trail Guard tongue removed
Trailer - Length over allnot available
Trailer - Weight1,440 lbs.
Trailer - Weightnot available
Trailer - Width84 in.
Trailer - Widthnot available

G3 Boats Angler V167 T 2010 vs G3 Boats Welded Jon - 1756VBW 2007 - Common Questions

Which is the larger boat - the G3 Boats Angler V167 T 2010 or the G3 Boats Welded Jon - 1756VBW 2007?
The G3 Boats Angler V167 T 2010 is the longer of the two at 16,6 feet overall. The G3 Boats Welded Jon - 1756VBW 2007 comes in at 16,0 feet, making it roughly 0,6 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats Angler V167 T 2010 or the G3 Boats Welded Jon - 1756VBW 2007?
For trailering, the G3 Boats Welded Jon - 1756VBW 2007 has the edge at 425 lbs dry weight versus 800 lbs for the G3 Boats Angler V167 T 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats Angler V167 T 2010 is rated to a maximum of 60 hp, giving it the larger power ceiling. The G3 Boats Welded Jon - 1756VBW 2007 tops out at 50 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats Angler V167 T 2010 is Coast Guard rated for 5 passengers, while the G3 Boats Welded Jon - 1756VBW 2007 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats Welded Jon - 1756VBW 2007 has a better power-to-weight ratio at 9 lbs per hp compared to 13 lbs per hp for the G3 Boats Angler V167 T 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the G3 Boats Angler V167 T 2010 and G3 Boats Welded Jon - 1756VBW 2007 share an 77 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the G3 Boats Angler V167 T 2010 and G3 Boats Welded Jon - 1756VBW 2007 from the same manufacturer?
Yes - both the G3 Boats Angler V167 T 2010 and the G3 Boats Welded Jon - 1756VBW 2007 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.