The G3 Boats Angler V162 T 2012 vs G3 Boats Welded Jon - 1652VBW 2007 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — G3 Boats Angler V162 T 2012 at 16,4 ft versus G3 Boats Welded Jon - 1652VBW 2007 at 15,0 ft. Weight tells a clearer story for trailering families: the G3 Boats Angler V162 T 2012 tips the scales at 114 lbs — 110 lbs more than the G3 Boats Welded Jon - 1652VBW 2007 at 4 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 75 hp, the G3 Boats Angler V162 T 2012 has a 35-hp advantage over the G3 Boats Welded Jon - 1652VBW 2007's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V162 T 2012 is rated for 5 passengers, while the G3 Boats Welded Jon - 1652VBW 2007 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V162 T 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Welded Jon - 1652VBW 2007 comes in at 0 lbs per hp versus 2 lbs per hp for the G3 Boats Angler V162 T 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.