Matching a modified vee G3 Boats Angler V 185 FS 2005 against a flat G3 Boats Welded Jon - 1648 WL 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats Angler V 185 FS 2005 at 18,0 ft versus G3 Boats Welded Jon - 1648 WL 2010 at 15,8 ft. Weight tells a clearer story for trailering families: the G3 Boats Angler V 185 FS 2005 tips the scales at 161 lbs — 123 lbs more than the G3 Boats Welded Jon - 1648 WL 2010 at 38 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 200 hp, the G3 Boats Angler V 185 FS 2005 has a 175-hp advantage over the G3 Boats Welded Jon - 1648 WL 2010's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V 185 FS 2005 is rated for 8 passengers, while the G3 Boats Welded Jon - 1648 WL 2010 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V 185 FS 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V 185 FS 2005 comes in at 1 lbs per hp versus 2 lbs per hp for the G3 Boats Welded Jon - 1648 WL 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.