Matching a modified vee G3 Boats Angler V 167 T 2005 against a deep vee G3 Boats V172 F 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats Angler V 167 T 2005 at 16,0 ft versus G3 Boats V172 F 2009 at 17,0 ft. Weight tells a clearer story for trailering families: the G3 Boats V172 F 2009 tips the scales at 155 lbs — 147 lbs less than the G3 Boats Angler V 167 T 2005 at 8 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats V172 F 2009 has a 55-hp advantage over the G3 Boats Angler V 167 T 2005's 60-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the G3 Boats V172 F 2009 carries 33 gallons versus 6 gallons in the G3 Boats Angler V 167 T 2005. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V 167 T 2005 comes in at 0 lbs per hp versus 1 lbs per hp for the G3 Boats V172 F 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.