Matching a pontoon G3 Boats 188 C 2010 against a deep vee G3 Boats Angler V172 C 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 188 C 2010 at 18,0 ft versus G3 Boats Angler V172 C 2010 at 17,2 ft. Weight tells a clearer story for trailering families: the G3 Boats 188 C 2010 tips the scales at 162 lbs — 148 lbs more than the G3 Boats Angler V172 C 2010 at 14 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the G3 Boats Angler V172 C 2010 has a 40-hp advantage over the G3 Boats 188 C 2010's 75-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the G3 Boats Angler V172 C 2010 carries 33 gallons versus 3 gallons in the G3 Boats 188 C 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats 188 C 2010 is rated for 8 passengers, while the G3 Boats Angler V172 C 2010 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats 188 C 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V172 C 2010 comes in at 0 lbs per hp versus 2 lbs per hp for the G3 Boats 188 C 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.