Matching a flat G3 Boats 1756 SC 2011 against a modified vee G3 Boats Angler V 175 FS 2005 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 1756 SC 2011 at 16,8 ft versus G3 Boats Angler V 175 FS 2005 at 17,0 ft. At 78 lbs and 146 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 175 hp, the G3 Boats Angler V 175 FS 2005 has a 105-hp advantage over the G3 Boats 1756 SC 2011's 70-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the G3 Boats Angler V 175 FS 2005 carries 35 gallons versus 16 gallons in the G3 Boats 1756 SC 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Angler V 175 FS 2005 is rated for 6 passengers, while the G3 Boats 1756 SC 2011 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Angler V 175 FS 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V 175 FS 2005 comes in at 1 lbs per hp versus 1 lbs per hp for the G3 Boats 1756 SC 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.