The G3 Boats 1756 CCT DLX 2009 is a tunnel hull design and the G3 Boats 1756 SC DLX 2012 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - G3 Boats 1756 CCT DLX 2009 at 17,0 ft versus G3 Boats 1756 SC DLX 2012 at 16,8 ft. At 750 lbs and 800 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling - 70 hp for the G3 Boats 1756 CCT DLX 2009 and 70 hp for the G3 Boats 1756 SC DLX 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the G3 Boats 1756 SC DLX 2012 carries 16 gallons versus 12 gallons in the G3 Boats 1756 CCT DLX 2009. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1756 CCT DLX 2009 comes in at 11 lbs per hp versus 11 lbs per hp for the G3 Boats 1756 SC DLX 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The G3 Boats 1756 CCT DLX 2009 and G3 Boats 1756 SC DLX 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.