Matching a flat G3 Boats 1756 CC 2013 against a modified vee G3 Boats Eagle 178 PF 2011 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 1756 CC 2013 at 16,8 ft versus G3 Boats Eagle 178 PF 2011 at 17,7 ft. Weight tells a clearer story for trailering families: the G3 Boats 1756 CC 2013 tips the scales at 805 lbs — 693 lbs more than the G3 Boats Eagle 178 PF 2011 at 112 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 70 hp for the G3 Boats 1756 CC 2013 and 90 hp for the G3 Boats Eagle 178 PF 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 16 gal and 15 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The G3 Boats 1756 CC 2013 is rated for 5 passengers, while the G3 Boats Eagle 178 PF 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats 1756 CC 2013 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Eagle 178 PF 2011 comes in at 1 lbs per hp versus 12 lbs per hp for the G3 Boats 1756 CC 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.