Matching a modified vee G3 Boats 1756 CC DLX 2010 against a flat G3 Boats Outfitter 1756 WOF 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 1756 CC DLX 2010 at 16,8 ft versus G3 Boats Outfitter 1756 WOF 2012 at 16,8 ft. Weight tells a clearer story for trailering families: the G3 Boats 1756 CC DLX 2010 tips the scales at 825 lbs — 764 lbs more than the G3 Boats Outfitter 1756 WOF 2012 at 61 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 70 hp for the G3 Boats 1756 CC DLX 2010 and 50 hp for the G3 Boats Outfitter 1756 WOF 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the G3 Boats 1756 CC DLX 2010 carries 16 gallons versus 7 gallons in the G3 Boats Outfitter 1756 WOF 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Outfitter 1756 WOF 2012 comes in at 1 lbs per hp versus 12 lbs per hp for the G3 Boats 1756 CC DLX 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.