The G3 Boats 1652SC Camo 2007 vs G3 Boats Jet Tunnel 1656 CCJ 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department - G3 Boats 1652SC Camo 2007 at 15,0 ft versus G3 Boats Jet Tunnel 1656 CCJ 2013 at 16,4 ft. Weight tells a clearer story for trailering families: the G3 Boats Jet Tunnel 1656 CCJ 2013 tips the scales at 810 lbs - 150 lbs less than the G3 Boats 1652SC Camo 2007 at 660 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling - 60 hp for the G3 Boats 1652SC Camo 2007 and 60 hp for the G3 Boats Jet Tunnel 1656 CCJ 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads - 12 gal and 9 gal - so range won't be a tiebreaker here.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652SC Camo 2007 comes in at 11 lbs per hp versus 14 lbs per hp for the G3 Boats Jet Tunnel 1656 CCJ 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The G3 Boats 1652SC Camo 2007 and G3 Boats Jet Tunnel 1656 CCJ 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.