G3 Boats 1652 WSOF Jon 2012 boat specs
G3 Boats
G3 Boats 1652 WSOF Jon 2012
2012
View full specs →
VS
G3 Boats Welded Jon - 1548 VBW 2009 boat specs
G3 Boats
G3 Boats Welded Jon - 1548 VBW 2009
2009
View full specs →

G3 Boats 1652 WSOF Jon 2012 vs G3 Boats Welded Jon - 1548 VBW 2009: Same Brand, Different Boat

The G3 Boats 1652 WSOF Jon 2012 is a flat-bottom design and the G3 Boats Welded Jon - 1548 VBW 2009 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - G3 Boats 1652 WSOF Jon 2012 at 15,8 ft versus G3 Boats Welded Jon - 1548 VBW 2009 at 14,0 ft. Weight tells a clearer story for trailering families: the G3 Boats 1652 WSOF Jon 2012 tips the scales at 460 lbs - 165 lbs more than the G3 Boats Welded Jon - 1548 VBW 2009 at 295 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the G3 Boats 1652 WSOF Jon 2012 has a 25-hp advantage over the G3 Boats Welded Jon - 1548 VBW 2009's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 WSOF Jon 2012 comes in at 9 lbs per hp versus 12 lbs per hp for the G3 Boats Welded Jon - 1548 VBW 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the G3 Boats 1652 WSOF Jon 2012 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Welded Jon - 1548 VBW 2009 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeG3 Boats
MakeG3 Boats
Model1652 WSOF Jon
ModelWelded Jon - 1548 VBW
Model Year2012
Model Year2009
Measurements / Dimensions
Beam71 in.
Beam70 in.
Beam - Meters1.8
Beam - Meters1.78
Beam - Inches71
Beam - Inches70
Deadrise3℃
Deadrise0℃
Depth - Detail21 in.
Depth - Detail21 in.
Depth - Centimeters53.34
Depth - Centimeters53.34
Depth - Inches21
Depth - Inches21
Weight - Detail460 lbs.
Weight - Detail295 lbs.
Weight - kg208.65
Weight - kg133.81
Weight - lbs.460
Weight - lbs.295
Height [transom]20 in.
Height [transom]16 in.
Length - Feet15.83
Length - Feet14
Length overall - Detail15 ft. 10 in.
Length overall - Detail14 ft. 10 in.
Length overall - Meters4.83
Length overall - Meters4.52
Length overall - Inches190
Length overall - Inches178
Width [transom] - Detailnot available
Width [transom] - Detail48 in.
Length - Inchesnot available
Length - Inches10
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.100 ga.
Hull thickness0.100 ga.
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Engine makeYamaha
Engine makenot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine maxTiller: 50 hp Console: 60 hp
Engine max25 hp
Operational Info
Maximum capacity1,000 lbs.
Maximum capacity800 lbs.
Maximum people4
Maximum people4

G3 Boats 1652 WSOF Jon 2012 vs G3 Boats Welded Jon - 1548 VBW 2009 - Common Questions

Which is the larger boat - the G3 Boats 1652 WSOF Jon 2012 or the G3 Boats Welded Jon - 1548 VBW 2009?
The G3 Boats 1652 WSOF Jon 2012 is the longer of the two at 15,8 feet overall. The G3 Boats Welded Jon - 1548 VBW 2009 comes in at 14,0 feet, making it roughly 1,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the G3 Boats 1652 WSOF Jon 2012 or the G3 Boats Welded Jon - 1548 VBW 2009?
For trailering, the G3 Boats Welded Jon - 1548 VBW 2009 has the edge at 295 lbs dry weight versus 460 lbs for the G3 Boats 1652 WSOF Jon 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The G3 Boats 1652 WSOF Jon 2012 is rated to a maximum of 50 hp, giving it the larger power ceiling. The G3 Boats Welded Jon - 1548 VBW 2009 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The G3 Boats 1652 WSOF Jon 2012 is Coast Guard rated for 4 passengers, while the G3 Boats Welded Jon - 1548 VBW 2009 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The G3 Boats 1652 WSOF Jon 2012 has a better power-to-weight ratio at 9 lbs per hp compared to 12 lbs per hp for the G3 Boats Welded Jon - 1548 VBW 2009. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The G3 Boats 1652 WSOF Jon 2012 measures 71" wide, compared to 70" for the G3 Boats Welded Jon - 1548 VBW 2009. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the G3 Boats 1652 WSOF Jon 2012 and G3 Boats Welded Jon - 1548 VBW 2009 from the same manufacturer?
Yes - both the G3 Boats 1652 WSOF Jon 2012 and the G3 Boats Welded Jon - 1548 VBW 2009 are built by G3 Boats. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.