Matching a flat G3 Boats 1652 VBW Jon 2013 against a modified vee G3 Boats Welded Jon - 1756 VBW 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 1652 VBW Jon 2013 at 15,8 ft versus G3 Boats Welded Jon - 1756 VBW 2009 at 16,0 ft. Weight tells a clearer story for trailering families: the G3 Boats Welded Jon - 1756 VBW 2009 tips the scales at 425 lbs — 421 lbs less than the G3 Boats 1652 VBW Jon 2013 at 4 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 50 hp for the G3 Boats 1652 VBW Jon 2013 and 50 hp for the G3 Boats Welded Jon - 1756 VBW 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Welded Jon - 1756 VBW 2009 is rated for 5 passengers, while the G3 Boats 1652 VBW Jon 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Welded Jon - 1756 VBW 2009 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 VBW Jon 2013 comes in at 0 lbs per hp versus 9 lbs per hp for the G3 Boats Welded Jon - 1756 VBW 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.