When two boats share the same hull type — in this case both the G3 Boats 1652 SC 2011 and the G3 Boats 1756 CC 2013 are flat designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — G3 Boats 1652 SC 2011 at 15,8 ft versus G3 Boats 1756 CC 2013 at 16,8 ft. Weight tells a clearer story for trailering families: the G3 Boats 1756 CC 2013 tips the scales at 805 lbs — 739 lbs less than the G3 Boats 1652 SC 2011 at 66 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 60 hp for the G3 Boats 1652 SC 2011 and 70 hp for the G3 Boats 1756 CC 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the G3 Boats 1756 CC 2013 carries 16 gallons versus 12 gallons in the G3 Boats 1652 SC 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats 1756 CC 2013 is rated for 5 passengers, while the G3 Boats 1652 SC 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats 1756 CC 2013 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 SC 2011 comes in at 1 lbs per hp versus 12 lbs per hp for the G3 Boats 1756 CC 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.