Matching a flat G3 Boats 1652 DK 2011 against a deep vee G3 Boats Guide V177 T 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — G3 Boats 1652 DK 2011 at 15,8 ft versus G3 Boats Guide V177 T 2012 at 17,6 ft. Weight tells a clearer story for trailering families: the G3 Boats Guide V177 T 2012 tips the scales at 775 lbs — 709 lbs less than the G3 Boats 1652 DK 2011 at 66 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 50 hp for the G3 Boats 1652 DK 2011 and 60 hp for the G3 Boats Guide V177 T 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the G3 Boats Guide V177 T 2012 carries 19 gallons versus 6 gallons in the G3 Boats 1652 DK 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The G3 Boats Guide V177 T 2012 is rated for 6 passengers, while the G3 Boats 1652 DK 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the G3 Boats Guide V177 T 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 DK 2011 comes in at 1 lbs per hp versus 13 lbs per hp for the G3 Boats Guide V177 T 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.