The G3 Boats 1652 CC 2012 vs G3 Boats Welded Jon - 1548VBW 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — G3 Boats 1652 CC 2012 at 15,8 ft versus G3 Boats Welded Jon - 1548VBW 2006 at 14,0 ft. Weight tells a clearer story for trailering families: the G3 Boats 1652 CC 2012 tips the scales at 685 lbs — 390 lbs more than the G3 Boats Welded Jon - 1548VBW 2006 at 295 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 60 hp, the G3 Boats 1652 CC 2012 has a 35-hp advantage over the G3 Boats Welded Jon - 1548VBW 2006's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 CC 2012 comes in at 11 lbs per hp versus 12 lbs per hp for the G3 Boats Welded Jon - 1548VBW 2006. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the G3 Boats 1652 CC 2012 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats Welded Jon - 1548VBW 2006 with its 25-hp rating is the more economical daily driver.