The G3 Boats 1448 WSOF Jon 2013 is a flat-bottom design and the G3 Boats 1652 DK 2009 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - G3 Boats 1448 WSOF Jon 2013 at 13,8 ft versus G3 Boats 1652 DK 2009 at 15,0 ft. Weight tells a clearer story for trailering families: the G3 Boats 1652 DK 2009 tips the scales at 660 lbs - 320 lbs less than the G3 Boats 1448 WSOF Jon 2013 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 50 hp, the G3 Boats 1652 DK 2009 has a 25-hp advantage over the G3 Boats 1448 WSOF Jon 2013's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats 1652 DK 2009 comes in at 13 lbs per hp versus 14 lbs per hp for the G3 Boats 1448 WSOF Jon 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the G3 Boats 1652 DK 2009 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the G3 Boats 1448 WSOF Jon 2013 with its 25-hp rating is the more economical daily driver.