The G3 Boats 1448 Riveted Loose Jon 2022 vs G3 Boats Angler V170 C 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The G3 Boats Angler V170 C 2012 measures 16,8 feet overall (2012), giving it roughly 3,7 additional feet of deck space compared to the G3 Boats 1448 Riveted Loose Jon 2022 at 13,1 feet (2022). Weight tells a clearer story for trailering families: the G3 Boats 1448 Riveted Loose Jon 2022 tips the scales at 233 lbs — 125 lbs more than the G3 Boats Angler V170 C 2012 at 108 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the G3 Boats Angler V170 C 2012 has a 65-hp advantage over the G3 Boats 1448 Riveted Loose Jon 2022's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The G3 Boats Angler V170 C 2012 comes in at 1 lbs per hp versus 9 lbs per hp for the G3 Boats 1448 Riveted Loose Jon 2022. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

The G3 Boats 1448 Riveted Loose Jon 2022 is trailerable — a genuine lifestyle advantage at this size. The G3 Boats Angler V170 C 2012 isn't listed as trailerable, which may mean a permanent berth or mooring is required.