Matching a flat Fisher 1432 Riveted Jon 2009 against a modified vee Fisher 1548 S All Welded Jon 2007 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department — Fisher 1432 Riveted Jon 2009 at 13,0 ft versus Fisher 1548 S All Welded Jon 2007 at 15,0 ft. At 12 lbs and 38 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling — 6 hp for the Fisher 1432 Riveted Jon 2009 and 25 hp for the Fisher 1548 S All Welded Jon 2007. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 3 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Fisher 1548 S All Welded Jon 2007 comes in at 2 lbs per hp versus 2 lbs per hp for the Fisher 1432 Riveted Jon 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Fisher 1548 S All Welded Jon 2007 and its 25-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Fisher 1432 Riveted Jon 2009 with its 6-hp rating is the more economical daily driver.