The Elan Yachts 350 Standard/Deep draft 2011 vs Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Elan Yachts 350 Standard/Deep draft 2011 measures 34,1 feet overall (2011), giving it roughly 3,7 additional feet of deck space compared to the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016 at 30,4 feet (2016). Weight tells a clearer story for trailering families: the Elan Yachts 350 Standard/Deep draft 2011 tips the scales at 11 982 lbs — 3 194 lbs more than the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016 at 8 788 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 30 hp for the Elan Yachts 350 Standard/Deep draft 2011 and 18 hp for the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Elan Yachts 350 Standard/Deep draft 2011 carries 20 gallons versus 12 gallons in the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Elan Yachts 350 Standard/Deep draft 2011 is rated for 10 passengers, while the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Elan Yachts 350 Standard/Deep draft 2011 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Elan Yachts 350 Standard/Deep draft 2011 displaces 11 982 lbs — a 3 194-lb difference over the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016 at 8 788 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 7,1 ft and 7,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Elan Yachts 350 Standard/Deep draft 2011 uses Sloop rigging. Helm style differs too: the Elan Yachts 350 Standard/Deep draft 2011 uses a Twin helm wheels versus a Twin wheels on the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Elan Yachts 350 Standard/Deep draft 2011 carries a 30-hp engine against 18 hp on the Elan Yachts S3 Deep draft/Medium draft/Shoal draft 2016. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.