EdgeWater 318CC 2010 boat specs
EdgeWater
EdgeWater 318CC 2010
2010
View full specs →
VS
EdgeWater 335EX 2012 boat specs
EdgeWater
EdgeWater 335EX 2012
2012
View full specs →

EdgeWater 318CC 2010 vs EdgeWater 335EX 2012 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the EdgeWater 318CC 2010 and the EdgeWater 335EX 2012 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — EdgeWater 318CC 2010 at 32,0 ft versus EdgeWater 335EX 2012 at 32,5 ft. At 65 lbs and 129 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 700 hp for the EdgeWater 318CC 2010 and 700 hp for the EdgeWater 335EX 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 3 gal and 3 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The EdgeWater 335EX 2012 is rated for 14 passengers, while the EdgeWater 318CC 2010 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the EdgeWater 335EX 2012 could be the deciding factor.

Bottom line: Choose the EdgeWater 335EX 2012 if your priority is putting more people on the water — it handles 14 passengers and at 32,5 ft it has the deck room to back that rating up comfortably. The EdgeWater 318CC 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 12 that costs less to run day-to-day.
General Boat Info
MakeEdgeWater
MakeEdgeWater
Model318CC
Model335EX
Model Year201
Model Year2012
Measurements / Dimensions
Beam10 ft. 2 in. (3.1 m)
Beam11 ft. 2 in. (3.4 m)
Beam - Meters3.1
Beam - Meters3.4
Beam - Inches122
Beam - Inches134
Bridge clearance - DetailWith T-top: 114 in. (2.9 m) Without T-top: 78 in. (2 m)
Bridge clearance - Detail10 ft. 6 in. (3.2 m) with T-top
Bridge clearance - Meters2.9
Bridge clearance - Meters3.2
Bridge clearance - Inches114
Bridge clearance - Inches126
Draft [max] - Detail22 in. (56 cm)
Draft [max] - Detail27 in. (56 cm)
Draft [max] - Meters0.56
Draft [max] - Meters0.69
Draft [max] - Inches22
Draft [max] - Inches27
Weight - Detail6,500 lbs. (2,948 kg)
Weight - Detail12,900 lbs. (5,851 kg)
Weight - kg2948.35
Weight - kg5851.34
Weight - lbs.65
Weight - lbs.129
Height [transom]25 in
Height [transom]25 in. (63.5 cm)
Length - Meters9.8
Length - Metersnot available
Length - Feet32
Length - Feet32.5
Length - Inches4
Length - Inchesnot available
Length overall - Detail32 ft. 4 in. (9.8 m)
Length overall - Detail32 ft. 6 in. (9.9 m) 34 ft. 6 in. (10.5 m) with bow roller
Length overall - Meters9.86
Length overall - Meters10.52
Length overall - Inches388
Length overall - Inches414
Depth - Detailnot available
Depth - Detail29 in. (76 cm)
Depth - Centimetersnot available
Depth - Centimeters73.66
Depth - Inchesnot available
Depth - Inches29
Body / Hull
Hull materialFiberglass
Hull materialComposite
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine/s standardYamaha Twin F250 4-stroke, Twin Z300 2-stroke or Twin F35
Engine/s standardYamaha Twin F250 or F350 4-stroke
Fuel tank capacity - Detail300 gal. (1,136 l)
Fuel tank capacity - Detail300 gal. (1,136 l)
Fuel tank capacity - Liters1135.62
Fuel tank capacity - Liters1135.62
Fuel tank capacity - Gal3
Fuel tank capacity - Gal3
Fuel typeGas
Fuel typeGas
Drive typeOutboard - Twin
Drive typeOutboard - Twin
Engine max700 hp
Engine max700 hp (515 kW)
Operational Info
HeadElectric
HeadEnclosed
Maximum capacity4,500 lbs. (2,041 kg)
Maximum capacity7,650 lbs. (3,470 kg)
Maximum people12
Maximum people14
Trailer Info
Trailer - Length over all40 ft. 0 in. (12.1 m)
Trailer - Length over all40 ft. (12.1 m)

EdgeWater 318CC 2010 vs EdgeWater 335EX 2012 — Common Questions

Which is the larger boat — the EdgeWater 318CC 2010 or the EdgeWater 335EX 2012?
The EdgeWater 335EX 2012 is the longer of the two at 32,5 feet overall. The EdgeWater 318CC 2010 comes in at 32,0 feet, making it roughly 0,5 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the EdgeWater 318CC 2010 or the EdgeWater 335EX 2012?
For trailering, the EdgeWater 318CC 2010 has the edge at 65 lbs dry weight versus 129 lbs for the EdgeWater 335EX 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The EdgeWater 318CC 2010 is Coast Guard rated for 12 passengers, while the EdgeWater 335EX 2012 is certified for 14. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The EdgeWater 335EX 2012 measures 134" wide, compared to 122" for the EdgeWater 318CC 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the EdgeWater 318CC 2010 and EdgeWater 335EX 2012?
Both boats carry similar fuel loads — 3 gallons and 3 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the EdgeWater 318CC 2010 and EdgeWater 335EX 2012 from the same manufacturer?
Yes — both the EdgeWater 318CC 2010 and the EdgeWater 335EX 2012 are built by EdgeWater. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.