Donzi 35 ZF Cuddy 2010 boat specs
Donzi
Donzi 35 ZF Cuddy 2010
2010
View full specs →
VS
Donzi 35 ZR 2005 boat specs
Donzi
Donzi 35 ZR 2005
2005
View full specs →

Donzi 35 ZF Cuddy 2010 vs Donzi 35 ZR 2005 — Same Brand, Different Boat

The Donzi 35 ZF Cuddy 2010 vs Donzi 35 ZR 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Donzi 35 ZF Cuddy 2010 at 33,3 ft versus Donzi 35 ZR 2005 at 35,0 ft. At 77 lbs and 78 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 1 050 hp, the Donzi 35 ZR 2005 has a 450-hp advantage over the Donzi 35 ZF Cuddy 2010's 600-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Donzi 35 ZF Cuddy 2010 carries 261 gallons versus 165 gallons in the Donzi 35 ZR 2005. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 10 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Donzi 35 ZR 2005 and its 1 050-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Donzi 35 ZF Cuddy 2010 with its 600-hp rating is the more economical daily driver.
General Boat Info
MakeDonzi
MakeDonzi
Model35 ZF Cuddy
Model35 ZR
Model Year201
Model Year2005
Measurements / Dimensions
Beam9 ft. 2 in. (2.79 m)
Beam8 ft. 6 in. (2.59 m)
Beam - Meters2.79
Beam - Meters2.59
Beam - Inches11
Beam - Inches102
Bridge clearance - Detail7 ft. 2 in. (2.18 m) w/Arch: 7 ft. 9 in. (2.35 m) w/T-Top: 8 ft. 8 in. (2.63 m)
Bridge clearance - Detailnot available
Bridge clearance - Meters2.64
Bridge clearance - Metersnot available
Bridge clearance - Inches104
Bridge clearance - Inchesnot available
Deadrise22℃ Z-Tech
DeadriseVariable
Draft [drive up] - Detail23 in. (0.58 m)
Draft [drive up] - Detail26 in. (.86 m)
Draft [drive up] meters0.58
Draft [drive up] meters0.66
Draft [drive up] inches23
Draft [drive up] inches26
Draft [max] - Detail35 in. (0.88 m)
Draft [max] - Detail34 in. (.64 m)
Draft [max] - Meters0.89
Draft [max] - Meters0.86
Draft [max] - Inches35
Draft [max] - Inches34
Weight - Detail7,700 lbs. (3,492 kg)
Weight - Detail7,800 (3,447.30 Kg)
Weight - kg3492.66
Weight - kg3538.02
Weight - lbs.77
Weight - lbs.78
Length - Meters10.5
Length - Meters10.74
Length - Feet33.33
Length - Feet35
Length overall - Detail33 ft. 4 in. (10.5 m)
Length overall - Detail35 ft. 3 in. (10.74 m)
Length overall - Meters10.16
Length overall - Meters10.74
Length overall - Inches4
Length overall - Inches423
Length - Inchesnot available
Length - Inches3
Body / Hull
Hull materialFiberglass
Hull materialnot available
Hull typeDeep Vee
Hull typenot available
Engine and Drivetrain
Fuel tank capacity - Detail261 gal. (9,879.97 l)
Fuel tank capacity - Detail165 gal. (624.59 l)
Fuel tank capacity - Liters987.99
Fuel tank capacity - Liters624.59
Fuel tank capacity - Gal261
Fuel tank capacity - Gal165
Fuel typeGas
Fuel typenot available
Drive typeOutboard - Twin
Drive typeI/O
Engine max600 hp (447.42 kW)
Engine max1,050 (782.98 kw)
Operational Info
HeadPorta-potti Enclosed in center console with fresh water shower & sink
Headnot available
Water capacity14 gal. (52.99 l)
Water capacity10 gal. (37.85 l)
Headroomnot available
Headroom60 in. (1.52 m)
Sleeping capacitynot available
Sleeping capacity2

Donzi 35 ZF Cuddy 2010 vs Donzi 35 ZR 2005 — Common Questions

Which is the larger boat — the Donzi 35 ZF Cuddy 2010 or the Donzi 35 ZR 2005?
The Donzi 35 ZR 2005 is the longer of the two at 35,0 feet overall. The Donzi 35 ZF Cuddy 2010 comes in at 33,3 feet, making it roughly 1,7 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Donzi 35 ZF Cuddy 2010 or the Donzi 35 ZR 2005?
For trailering, the Donzi 35 ZF Cuddy 2010 has the edge at 77 lbs dry weight versus 78 lbs for the Donzi 35 ZR 2005. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Donzi 35 ZR 2005 is rated to a maximum of 1 050 hp, giving it the larger power ceiling. The Donzi 35 ZF Cuddy 2010 tops out at 600 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Donzi 35 ZF Cuddy 2010 is Coast Guard rated for 10 passengers, while the Donzi 35 ZR 2005 is certified for 10. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Donzi 35 ZR 2005 measures 102" wide, compared to 11" for the Donzi 35 ZF Cuddy 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Donzi 35 ZF Cuddy 2010 or the Donzi 35 ZR 2005?
The Donzi 35 ZF Cuddy 2010 has the bigger tank at 261 gallons, versus 165 gallons on the Donzi 35 ZR 2005. That 96-gallon difference translates to roughly 288–480 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Donzi 35 ZF Cuddy 2010 and Donzi 35 ZR 2005 from the same manufacturer?
Yes — both the Donzi 35 ZF Cuddy 2010 and the Donzi 35 ZR 2005 are built by Donzi. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.