Custom Weld Viper II Outboard - 19 ft. 2010 boat specs
Custom Weld
Custom Weld Viper II Outboard - 19 ft. 2010
2010
View full specs →
VS
Custom Weld Viper Inboard Center Console - 19 ft. 2010 boat specs
Custom Weld
Custom Weld Viper Inboard Center Console - 19 ft. 2010
2010
View full specs →

Custom Weld Viper II Outboard - 19 ft. 2010 vs Custom Weld Viper Inboard Center Console - 19 ft. 2010 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Custom Weld Viper II Outboard - 19 ft. 2010 and the Custom Weld Viper Inboard Center Console - 19 ft. 2010 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Custom Weld Viper II Outboard - 19 ft. 2010 at 19,0 ft versus Custom Weld Viper Inboard Center Console - 19 ft. 2010 at 18,7 ft. At 12 lbs and 23 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Custom Weld Viper II Outboard - 19 ft. 2010 and Custom Weld Viper Inboard Center Console - 19 ft. 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeCustom Weld
MakeCustom Weld
ModelViper II Outboard - 19 ft
ModelViper Inboard Center Console - 19 ft
Model Year201
Model Year201
Measurements / Dimensions
Beam90 in
Beam90 in
Beam - Meters2.29
Beam - Meters2.29
Beam - Inches9
Beam - Inches9
Deadrise11℃
Deadrise11℃
Weight - Detail1,200 lbs
Weight - Detail2,300 lbs
Weight - kg544.31
Weight - kg1043.26
Weight - lbs.12
Weight - lbs.23
Height - Detail29 in. (side)
Height - Detail29 in. (side)
Height - Meters0.74
Height - Meters0.74
Height - Inches29
Height - Inches29
Length - Feet19
Length - Feet18.67
Length overall - Detail19 ft. 0 in
Length overall - Detail18 ft. 8 in
Length overall - Meters5.79
Length overall - Meters5.69
Length overall - Inches228
Length overall - Inches224
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.190 (bottom); 0.125 (side)
Hull thickness0.190 (bottom); 0.125 (side)
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Engine model4.3L V6
Engine model4.3L V-6
Fuel tank capacity - Detail38 gal
Fuel tank capacity - Detail39 gal
Fuel tank capacity - Liters143.85
Fuel tank capacity - Liters147.63
Fuel tank capacity - Gal38
Fuel tank capacity - Gal39
Fuel typeGas
Fuel typeGas
Drive typeJet Drive
Drive typeJet Drive
Engine makenot available
Engine makeVortec
Jet pumpnot available
Jet pumpATJ SD309

Custom Weld Viper II Outboard - 19 ft. 2010 vs Custom Weld Viper Inboard Center Console - 19 ft. 2010 — Common Questions

Which is the larger boat — the Custom Weld Viper II Outboard - 19 ft. 2010 or the Custom Weld Viper Inboard Center Console - 19 ft. 2010?
The Custom Weld Viper II Outboard - 19 ft. 2010 is the longer of the two at 19,0 feet overall. The Custom Weld Viper Inboard Center Console - 19 ft. 2010 comes in at 18,7 feet, making it roughly 0,3 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Custom Weld Viper II Outboard - 19 ft. 2010 or the Custom Weld Viper Inboard Center Console - 19 ft. 2010?
For trailering, the Custom Weld Viper II Outboard - 19 ft. 2010 has the edge at 12 lbs dry weight versus 23 lbs for the Custom Weld Viper Inboard Center Console - 19 ft. 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Custom Weld Viper II Outboard - 19 ft. 2010 is Coast Guard rated for 5 passengers, while the Custom Weld Viper Inboard Center Console - 19 ft. 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Custom Weld Viper II Outboard - 19 ft. 2010 and Custom Weld Viper Inboard Center Console - 19 ft. 2010 share an 90 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
How do the fuel tanks compare on the Custom Weld Viper II Outboard - 19 ft. 2010 and Custom Weld Viper Inboard Center Console - 19 ft. 2010?
Both boats carry similar fuel loads — 38 gallons and 39 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Custom Weld Viper II Outboard - 19 ft. 2010 and Custom Weld Viper Inboard Center Console - 19 ft. 2010 from the same manufacturer?
Yes — both the Custom Weld Viper II Outboard - 19 ft. 2010 and the Custom Weld Viper Inboard Center Console - 19 ft. 2010 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.