Custom Weld 26 - 44 ft. Twin Series 2012 vs Custom Weld Cobra SE - 20 ft. 2010 - Boat Spec Comparison

Q: Which is the larger boat — the Custom Weld 26 - 44 ft. Twin Series 2012 or the Custom Weld Cobra SE - 20 ft. 2010?

The Custom Weld 26 - 44 ft. Twin Series 2012 is the longer of the two at 26,0 feet overall. The Custom Weld Cobra SE - 20 ft. 2010 comes in at 2,0 feet, making it roughly 24,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which boat can handle a bigger outboard?

The Custom Weld 26 - 44 ft. Twin Series 2012 is rated to a maximum of 660 hp, giving it the larger power ceiling. The Custom Weld Cobra SE - 20 ft. 2010 tops out at 350 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Custom Weld 26 - 44 ft. Twin Series 2012 is Coast Guard rated for 13 passengers, while the Custom Weld Cobra SE - 20 ft. 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Are the Custom Weld 26 - 44 ft. Twin Series 2012 and Custom Weld Cobra SE - 20 ft. 2010 from the same manufacturer?

Yes — both the Custom Weld 26 - 44 ft. Twin Series 2012 and the Custom Weld Cobra SE - 20 ft. 2010 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Custom Weld 26 - 44 ft. Twin Series 2012 vs Custom Weld Cobra SE - 20 ft. 2010

Custom Weld

Custom Weld 26 - 44 ft. Twin Series 2012

2012

View full specs →

Custom Weld

Custom Weld Cobra SE - 20 ft. 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Custom Weld 26 - 44 ft. Twin Series 2012 vs Custom Weld Cobra SE - 20 ft. 2010 — Same Brand, Different Boat

Matching a deep vee Custom Weld 26 - 44 ft. Twin Series 2012 against a modified vee Custom Weld Cobra SE - 20 ft. 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The power gap is worth calling out. Rated to 660 hp, the Custom Weld 26 - 44 ft. Twin Series 2012 has a 310-hp advantage over the Custom Weld Cobra SE - 20 ft. 2010's 350-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Custom Weld 26 - 44 ft. Twin Series 2012 is rated for 13 passengers, while the Custom Weld Cobra SE - 20 ft. 2010 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Custom Weld 26 - 44 ft. Twin Series 2012 could be the deciding factor.

Bottom line: Choose the Custom Weld 26 - 44 ft. Twin Series 2012 if your priority is putting more people on the water — it handles 13 passengers and at 26,0 ft it has the deck room to back that rating up comfortably. The Custom Weld Cobra SE - 20 ft. 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 6 that costs less to run day-to-day.

General Boat Info

MakeCustom Weld

Model26 - 44 ft. Twin Series

ModelCobra SE - 20 ft

Model Year2012

Model Year201

Measurements / Dimensions

Length - Feet26

Length - Feet2

Length overall - Detail26 - 44 ft

Length overall - Detail20 ft. 0 in

Length overall - Meters13.41

Length overall - Meters6.1

Length overall - Inches528

Length overall - Inches24

Deadrisenot available

Deadrise11℃

Weight - Detailnot available

Weight - Detail2,700 lbs

Weight - kgnot available

Weight - kg1224.7

Weight - lbs.not available

Weight - lbs.27

Height - Detailnot available

Height - Detail32 in. (side)

Height - Metersnot available

Height - Meters0.81

Height - Inchesnot available

Height - Inches32

Body / Hull

Hull materialAluminum

Hull typeDeep Vee

Hull typeModified Vee

Hull thicknessnot available

Hull thickness0.190 (bottom); 0.125 (side)

Engine and Drivetrain

Fuel typeGas or Diesel

Fuel typeGas

Drive typeJet Drive - Twin

Drive typeJet Drive

Horsepower660 - 1,100 hp

Horsepower350 / 325 hp

Engine makenot available

Engine makeVortec

Jet pumpnot available

Jet pumpATJ SD309

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail52 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters196.84

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal52

Custom Weld 26 - 44 ft. Twin Series 2012 vs Custom Weld Cobra SE - 20 ft. 2010 — Common Questions

Which is the larger boat — the Custom Weld 26 - 44 ft. Twin Series 2012 or the Custom Weld Cobra SE - 20 ft. 2010?

The Custom Weld 26 - 44 ft. Twin Series 2012 is the longer of the two at 26,0 feet overall. The Custom Weld Cobra SE - 20 ft. 2010 comes in at 2,0 feet, making it roughly 24,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which boat can handle a bigger outboard?

The Custom Weld 26 - 44 ft. Twin Series 2012 is rated to a maximum of 660 hp, giving it the larger power ceiling. The Custom Weld Cobra SE - 20 ft. 2010 tops out at 350 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Custom Weld 26 - 44 ft. Twin Series 2012 is Coast Guard rated for 13 passengers, while the Custom Weld Cobra SE - 20 ft. 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Are the Custom Weld 26 - 44 ft. Twin Series 2012 and Custom Weld Cobra SE - 20 ft. 2010 from the same manufacturer?

Yes — both the Custom Weld 26 - 44 ft. Twin Series 2012 and the Custom Weld Cobra SE - 20 ft. 2010 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Custom Weld 26 - 44 ft. Twin Series 2012 full specs ← Custom Weld Cobra SE - 20 ft. 2010 full specs