Custom Weld 20 ft. Cobra 2013 boat specs
Custom Weld
Custom Weld 20 ft. Cobra 2013
2013
View full specs →
VS
Custom Weld Cobra - 20 ft. 2006 boat specs
Custom Weld
Custom Weld Cobra - 20 ft. 2006
2006
View full specs →

Custom Weld 20 ft. Cobra 2013 vs Custom Weld Cobra - 20 ft. 2006 — Same Brand, Different Boat

The Custom Weld 20 ft. Cobra 2013 vs Custom Weld Cobra - 20 ft. 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Custom Weld 20 ft. Cobra 2013 at 2,0 ft versus Custom Weld Cobra - 20 ft. 2006 at 2,0 ft. At 27 lbs and 27 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The Custom Weld 20 ft. Cobra 2013 carries a rated maximum of 350 hp. Engine data for the Custom Weld Cobra - 20 ft. 2006 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Both carry nearly identical fuel loads — 52 gal and 52 gal — so range won't be a tiebreaker here.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Custom Weld 20 ft. Cobra 2013 and Custom Weld Cobra - 20 ft. 2006 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeCustom Weld
MakeCustom Weld
Model20 ft. Cobra
ModelCobra - 20 ft
Model Year2013
Model Year2006
Measurements / Dimensions
Beam96 in
Beamnot available
Beam - Meters2.44
Beam - Metersnot available
Beam - Inches96
Beam - Inchesnot available
Deadrise11℃
Deadrise11℃
Weight - Detail2,700 lbs
Weight - Detail2,700 lbs
Weight - kg1224.7
Weight - kg1224.7
Weight - lbs.27
Weight - lbs.27
Width [transom] - Detail72 in. bottom width
Width [transom] - Detailnot available
Height - Detail34 in. side 26 in. inside freeboard
Height - Detail32 in. (side)
Height - Meters0.86
Height - Meters0.81
Height - Inches34
Height - Inches32
Length - Feet2
Length - Feet2
Length overall - Detail20 ft. hull center length
Length overall - Detail20 ft
Length overall - Meters6.1
Length overall - Meters6.1
Length overall - Inches24
Length overall - Inches24
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.190 bottom; 0.125 side
Hull thickness.190 (bottom); .125 (side)
Hull typeDeep Vee
Hull typenot available
Engine and Drivetrain
Engine modelMEFI 5 Vortec
Engine modelnot available
Jet pumpATJ SD309
Jet pumpATJ SD 309
Fuel tank capacity - Detail52 gal
Fuel tank capacity - Detail52 gal
Fuel tank capacity - Liters196.84
Fuel tank capacity - Liters196.84
Fuel tank capacity - Gal52
Fuel tank capacity - Gal52
Fuel typeGas
Fuel typeGas
Drive typeJet Drive
Drive typeJet Drive
Horsepower350 / 325 hp
Horsepowernot available
Engine/s standardnot available
Engine/s standardVortec 350/325 hp

Custom Weld 20 ft. Cobra 2013 vs Custom Weld Cobra - 20 ft. 2006 — Common Questions

Which is the larger boat — the Custom Weld 20 ft. Cobra 2013 or the Custom Weld Cobra - 20 ft. 2006?
The Custom Weld Cobra - 20 ft. 2006 is the longer of the two at 2,0 feet overall. The Custom Weld 20 ft. Cobra 2013 comes in at 2,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Custom Weld 20 ft. Cobra 2013 or the Custom Weld Cobra - 20 ft. 2006?
For trailering, the Custom Weld Cobra - 20 ft. 2006 has the edge at 27 lbs dry weight versus 27 lbs for the Custom Weld 20 ft. Cobra 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Custom Weld 20 ft. Cobra 2013 has a documented max rating of 350 hp. Engine specifications for the Custom Weld Cobra - 20 ft. 2006 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Custom Weld 20 ft. Cobra 2013 is Coast Guard rated for 6 passengers, while the Custom Weld Cobra - 20 ft. 2006 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
How do the fuel tanks compare on the Custom Weld 20 ft. Cobra 2013 and Custom Weld Cobra - 20 ft. 2006?
Both boats carry similar fuel loads — 52 gallons and 52 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Custom Weld 20 ft. Cobra 2013 and Custom Weld Cobra - 20 ft. 2006 from the same manufacturer?
Yes — both the Custom Weld 20 ft. Cobra 2013 and the Custom Weld Cobra - 20 ft. 2006 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.