Custom Weld 17 - 26 ft. Outboards 2012 boat specs
Custom Weld
Custom Weld 17 - 26 ft. Outboards 2012
2012
View full specs →
VS
Custom Weld Center Console Inboard - 20 ft. 2010 boat specs
Custom Weld
Custom Weld Center Console Inboard - 20 ft. 2010
2010
View full specs →

Custom Weld 17 - 26 ft. Outboards 2012 vs Custom Weld Center Console Inboard - 20 ft. 2010 — Same Brand, Different Boat

Matching a deep vee Custom Weld 17 - 26 ft. Outboards 2012 against a modified vee Custom Weld Center Console Inboard - 20 ft. 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The Custom Weld 17 - 26 ft. Outboards 2012 measures 17,0 feet overall (2012), giving it roughly 15,0 additional feet of deck space compared to the Custom Weld Center Console Inboard - 20 ft. 2010 at 2,0 feet (2010). At 29 lbs and 26 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 350 hp, the Custom Weld Center Console Inboard - 20 ft. 2010 has a 331-hp advantage over the Custom Weld 17 - 26 ft. Outboards 2012's 19-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Custom Weld Center Console Inboard - 20 ft. 2010 carries 52 gallons versus 9 gallons in the Custom Weld 17 - 26 ft. Outboards 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Custom Weld 17 - 26 ft. Outboards 2012 is rated for 7 passengers, while the Custom Weld Center Console Inboard - 20 ft. 2010 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Custom Weld 17 - 26 ft. Outboards 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Custom Weld Center Console Inboard - 20 ft. 2010 comes in at 0 lbs per hp versus 2 lbs per hp for the Custom Weld 17 - 26 ft. Outboards 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Custom Weld 17 - 26 ft. Outboards 2012 if your priority is putting more people on the water — it handles 7 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Custom Weld Center Console Inboard - 20 ft. 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 6 that costs less to run day-to-day.
General Boat Info
MakeCustom Weld
MakeCustom Weld
Model17 - 26 ft. Outboards
ModelCenter Console Inboard - 20 ft
Model Year2012
Model Year201
Measurements / Dimensions
Beam96 - 102 in
Beamnot available
Beam - Meters2.59
Beam - Metersnot available
Beam - Inches102
Beam - Inchesnot available
Weight - Detail1,200 - 2,900 lbs
Weight - Detail2,600 lbs
Weight - kg1315.42
Weight - kg1179.34
Weight - lbs.29
Weight - lbs.26
Length - Feet17
Length - Feet2
Length overall - Detail17 - 26 ft
Length overall - Detail20 ft. 0 in
Length overall - Meters7.92
Length overall - Meters6.1
Length overall - Inches312
Length overall - Inches24
Deadrisenot available
Deadrise11℃
Height - Detailnot available
Height - Detail32 in. (side)
Height - Metersnot available
Height - Meters0.81
Height - Inchesnot available
Height - Inches32
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness19 - 21 ft.: 0.190 (bottom) 22 - 26 ft.: 0.250 (bottom) 0.125 (side)
Hull thickness0.190 (bottom); 0.125 (side)
Hull typeDeep Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail38 - 90 gal
Fuel tank capacity - Detail52 gal
Fuel tank capacity - Liters340.69
Fuel tank capacity - Liters196.84
Fuel tank capacity - Gal9
Fuel tank capacity - Gal52
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeJet Drive
Horsepower19 ft.: 175 hp 20 ft.: 200 hp 21 - 22 ft.: 250 hp 23 - 24 ft.: 300 hp or as specified 25 - 26 ft.: 400 hp or as specified
Horsepower350 / 325 hp
Engine makenot available
Engine makeVortec
Jet pumpnot available
Jet pumpATJ SD309

Custom Weld 17 - 26 ft. Outboards 2012 vs Custom Weld Center Console Inboard - 20 ft. 2010 — Common Questions

Which is the larger boat — the Custom Weld 17 - 26 ft. Outboards 2012 or the Custom Weld Center Console Inboard - 20 ft. 2010?
The Custom Weld 17 - 26 ft. Outboards 2012 is the longer of the two at 17,0 feet overall. The Custom Weld Center Console Inboard - 20 ft. 2010 comes in at 2,0 feet, making it roughly 15,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Custom Weld 17 - 26 ft. Outboards 2012 or the Custom Weld Center Console Inboard - 20 ft. 2010?
For trailering, the Custom Weld Center Console Inboard - 20 ft. 2010 has the edge at 26 lbs dry weight versus 29 lbs for the Custom Weld 17 - 26 ft. Outboards 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Custom Weld Center Console Inboard - 20 ft. 2010 is rated to a maximum of 350 hp, giving it the larger power ceiling. The Custom Weld 17 - 26 ft. Outboards 2012 tops out at 19 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Custom Weld 17 - 26 ft. Outboards 2012 is Coast Guard rated for 7 passengers, while the Custom Weld Center Console Inboard - 20 ft. 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Custom Weld Center Console Inboard - 20 ft. 2010 has a better power-to-weight ratio at 0 lbs per hp compared to 2 lbs per hp for the Custom Weld 17 - 26 ft. Outboards 2012. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat has the larger fuel tank — the Custom Weld 17 - 26 ft. Outboards 2012 or the Custom Weld Center Console Inboard - 20 ft. 2010?
The Custom Weld Center Console Inboard - 20 ft. 2010 has the bigger tank at 52 gallons, versus 9 gallons on the Custom Weld 17 - 26 ft. Outboards 2012. That 43-gallon difference translates to roughly 129–215 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Custom Weld 17 - 26 ft. Outboards 2012 and Custom Weld Center Console Inboard - 20 ft. 2010 from the same manufacturer?
Yes — both the Custom Weld 17 - 26 ft. Outboards 2012 and the Custom Weld Center Console Inboard - 20 ft. 2010 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.