Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld Viper II Inboard - 19 ft. 2008 - Boat Spec Comparison

Q: Which is the larger boat — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld Viper II Inboard - 19 ft. 2008?

The Custom Weld Viper II Inboard - 19 ft. 2008 is the longer of the two at 18,0 feet overall. The Custom Weld 17 - 26 ft. Outboards 2011 comes in at 17,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: What is the maximum horsepower rating for these boats?

The Custom Weld 17 - 26 ft. Outboards 2011 has a documented max rating of 19 hp. Engine specifications for the Custom Weld Viper II Inboard - 19 ft. 2008 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Custom Weld 17 - 26 ft. Outboards 2011 is Coast Guard rated for 7 passengers, while the Custom Weld Viper II Inboard - 19 ft. 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Custom Weld 17 - 26 ft. Outboards 2011 measures 102" wide, compared to 9" for the Custom Weld Viper II Inboard - 19 ft. 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Which boat has the larger fuel tank — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld Viper II Inboard - 19 ft. 2008?

The Custom Weld 17 - 26 ft. Outboards 2011 has the bigger tank at 9 gallons, versus 4 gallons on the Custom Weld Viper II Inboard - 19 ft. 2008. That 5-gallon difference translates to roughly 15–25 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Q: Are the Custom Weld 17 - 26 ft. Outboards 2011 and Custom Weld Viper II Inboard - 19 ft. 2008 from the same manufacturer?

Yes — both the Custom Weld 17 - 26 ft. Outboards 2011 and the Custom Weld Viper II Inboard - 19 ft. 2008 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld Viper II Inboard - 19 ft. 2008

Custom Weld

Custom Weld 17 - 26 ft. Outboards 2011

2011

View full specs →

Custom Weld

Custom Weld Viper II Inboard - 19 ft. 2008

2008

View full specs →

Detailed Evaluation & Buyer Recommendation

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld Viper II Inboard - 19 ft. 2008 — Same Brand, Different Boat

The Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld Viper II Inboard - 19 ft. 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Custom Weld 17 - 26 ft. Outboards 2011 carries a rated maximum of 19 hp. Engine data for the Custom Weld Viper II Inboard - 19 ft. 2008 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Custom Weld 17 - 26 ft. Outboards 2011 carries 9 gallons versus 4 gallons in the Custom Weld Viper II Inboard - 19 ft. 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Custom Weld 17 - 26 ft. Outboards 2011 is rated for 7 passengers, while the Custom Weld Viper II Inboard - 19 ft. 2008 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Custom Weld 17 - 26 ft. Outboards 2011 could be the deciding factor.

Bottom line: Choose the Custom Weld 17 - 26 ft. Outboards 2011 if your priority is putting more people on the water — it handles 7 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Custom Weld Viper II Inboard - 19 ft. 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.

General Boat Info

MakeCustom Weld

Model17 - 26 ft. Outboards

ModelViper II Inboard - 19 ft

Model Year2011

Model Year2008

Measurements / Dimensions

Beam96 - 102 in

Beam90 in

Beam - Meters2.59

Beam - Meters2.29

Beam - Inches102

Beam - Inches9

Length - Feet17

Length - Feet18

Length overall - Detail17 - 26 ft

Length overall - Detail18 ft. 8 in

Length overall - Meters7.92

Length overall - Meters5.69

Length overall - Inches312

Length overall - Inches224

Deadrisenot available

Deadrise11℃

Weight - Detailnot available

Weight - Detail2,400 lbs

Weight - kgnot available

Weight - kg1088.62

Weight - lbs.not available

Weight - lbs.24

Height - Detailnot available

Height - Detail29 in. (side)

Height - Metersnot available

Height - Meters0.74

Height - Inchesnot available

Height - Inches29

Length - Inchesnot available

Length - Inches8

Body / Hull

Hull materialAluminum

Hull materialnot available

Hull typeModified Vee

Hull typenot available

Hull thicknessnot available

Hull thickness0.190 (bottom); 0.125 (side)

Engine and Drivetrain

Fuel tank capacity - Detail38 - 90 gal

Fuel tank capacity - Detail40 gal

Fuel tank capacity - Liters340.69

Fuel tank capacity - Liters151.42

Fuel tank capacity - Gal9

Fuel tank capacity - Gal4

Fuel typeGas

Drive typeOutboard

Drive typeJet Drive

Horsepower19 ft.: 175 hp 20 ft.: 200 hp 21 - 22 ft.: 250 hp 23 - 24 ft.: 300 hp or as specified 25 - 26 ft.: 400 hp or as specified

Horsepowernot available

Engine/s standardnot available

Engine/s standard4.3L V6

Jet pumpnot available

Jet pumpATJ SD 309

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld Viper II Inboard - 19 ft. 2008 — Common Questions

Which is the larger boat — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld Viper II Inboard - 19 ft. 2008?

The Custom Weld Viper II Inboard - 19 ft. 2008 is the longer of the two at 18,0 feet overall. The Custom Weld 17 - 26 ft. Outboards 2011 comes in at 17,0 feet, making it roughly 1,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

What is the maximum horsepower rating for these boats?

The Custom Weld 17 - 26 ft. Outboards 2011 has a documented max rating of 19 hp. Engine specifications for the Custom Weld Viper II Inboard - 19 ft. 2008 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Custom Weld 17 - 26 ft. Outboards 2011 is Coast Guard rated for 7 passengers, while the Custom Weld Viper II Inboard - 19 ft. 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Custom Weld 17 - 26 ft. Outboards 2011 measures 102" wide, compared to 9" for the Custom Weld Viper II Inboard - 19 ft. 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Which boat has the larger fuel tank — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld Viper II Inboard - 19 ft. 2008?

The Custom Weld 17 - 26 ft. Outboards 2011 has the bigger tank at 9 gallons, versus 4 gallons on the Custom Weld Viper II Inboard - 19 ft. 2008. That 5-gallon difference translates to roughly 15–25 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Are the Custom Weld 17 - 26 ft. Outboards 2011 and Custom Weld Viper II Inboard - 19 ft. 2008 from the same manufacturer?

Yes — both the Custom Weld 17 - 26 ft. Outboards 2011 and the Custom Weld Viper II Inboard - 19 ft. 2008 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Custom Weld 17 - 26 ft. Outboards 2011 full specs ← Custom Weld Viper II Inboard - 19 ft. 2008 full specs